Advertisement
Quick Links
Advertisement
Summary of Contents for Familienbett SAMOS
- Page 1 ASSEMBLY INSTRUCTIONS Family bed SAMOS R I G I N A L R I M A...
- Page 2 Family bed SAMOS without Backrest CONTROL OF THE PARTS LIST The following wooden elements are included: Package 1/5 - Left end panels Package 2/5 - Middle end panels Package 3/5 - Right end panels Package 4/5 - Side panels Package 5/5 - Center support rail + hardware...
- Page 3 Family bed SAMOS with Backrest CONTROL OF THE PARTS LIST The following wooden elements are included: Package 1/5 - Left end panels Package 2/5 - Middle end panels Package 3/5 - Right end panels Package 4/5 - Side panels Package 5/5 - Center support rail + hardware...
- Page 4 START BY CONNECTING THE PARTS OF HEADBOARD AND FOOTBOARD Screw the 16 Connecting bolts (B) into the threaded bushings. Insert the 16 Connector housings (A) into the holes. The arrow on the Connector housing must be aligned with the hole so that the Connecting bolt can grip.
- Page 5 ATTACH SIDE PANELS TO THE HEADBOARD AND FOOTBOARD Screw the 8 Connecting bolts (B) into the threaded bushings. Insert the 8 Connector housings (A) into the holes. The arrow on the Connector housing must be aligned with the hole so that the Connecting bolts can grip.
- Page 6 ATTACH THE SIDE LEGS OF THE CENTER SUPPORT RAIL TO THE BED CORPUS Attach the side legs of the center support rail to the bed corpus with 8 flat head screws (D).
- Page 7 CONNECT THE CENTER SUPPORT RAILS TO THE LEGS Connect the center support rails to the legs using 12 wooden dowels and 6 threaded countersunk screws...
- Page 8 CONNECT THE LONG RAILS TO THE BACKREST Connect the two long connecting rails on each backrest with 8 flat head screws (F) respectively.
- Page 9 INSTALL BACKRESTS TO THE FAMILY BED Fasten the 2 short connecting rails to the backrests with 4 flat head screws (F) each. Attach each backrest to the family bed using 6 flat head screws respectively (F).