Kongsberg SIMRAD HC30 Service Manual
  1. Manuals
  2. Brands
  3. Kongsberg Manuals
  4. Controller
  5. SIMRAD HC30
  6. Service manual
Kongsberg SIMRAD HC30 Service Manual

Kongsberg SIMRAD HC30 Service Manual

Hand controller
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HC30 Hand Controller
Service Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SIMRAD HC30 and is the answer not in the manual?

Questions and answers

Related Manuals for Kongsberg SIMRAD HC30

Summary of Contents for Kongsberg SIMRAD HC30

  • Page 1 HC30 Hand Controller Service Manual...

  • Page 2: Table Of Contents

    Issue 1.0 20/02/01 Simrad Navico Ltd Star Lane, Margate, Kent CT9 4NP, UK Telephone +44 (0) 1843 290290 Facsimile +44 (0) 1843 290471 E-Mail : productsupportmargate@simrad.com CONTENTS INTRODUCTION 1.1 Electronics PCB 1.2 Mechanical Components OPERATION ASSEMBLY INSTRUCTIONS 3.1 LCD to PCB Assembly 3.2 General Assembly MECHANICAL ASSEMBLY DRAWINGS 4.1 General Assembly...

  • Page 3: Introduction

    HC30 Hand Controller Introduction...

  • Page 4: Electronics Pcb

    Issue 1.0 16/12/99 1 INTRODUCTION TO THE HC30 HAND CONTROLLER The HC30 Hand Controller provides complete hand control of the TP20, TP30 and WP30 Cockpit Autopilots. It includes a clear, backlit liquid crystal display providing autopilot status and course information. The main components of the hand controller are described below: 1.1 Electronics PCB Handcontroller PCB...
  • Page 5 HC30 Hand Controller Calibration & Operation...

  • Page 6: Operation

    Issue 1.0 16/12/99 2 CALIBRATING AND OPERATING THE HC30 This Service Manual only contains calibration and operational information for those features of the hand controller which are not normally available to the end user. For details of normal calibration and operation please refer to the user manual.

  • Page 7: Assembly Instructions

    HC30 Hand Controller Assembly Instructions...

  • Page 8: Lcd To Pcb Assembly

    Issue 1.0 16/12/99 3 ASSEMBLY INSTRUCTIONS 3.1 LCD to PCB Assembly Refer to Drawing No. E03730. Fit Lighting Block (E01874) to the PCB as shown. Mount the LCD (E02531) into the LCD retainer, after first removing the protective coating, ensuring that the retainer has 2 lugs and 2 posts towards the top edge and the long row of pixels are at the bottom of the LCD.
  • Page 9 HC30 Hand Controller Mech Assembly Drawings...

  • Page 10: Mechanical Assembly Drawings

    Issue 1.0 16/12/99 MECHANICAL ASSEMBLY DRAWINGS 4.1 General Assembly Hand Controller E03730...
  • Page 12 HC30 Hand Controller Circuit Description...

  • Page 13: Circuit Descriptions

    Issue 1.0 16/12/99 CIRCUIT DESCRIPTIONS 5.1 PCB Assembly Introduction A common PCB is used for the SHC14 and HC30 Hand Controllers. The majority of components are fitted as common and the differences are highlighted on the circuit diagram using dotted boxes. The circuit diagram for the PCB is given in Drawing No.

  • Page 14: Circuit Diagrams

    HC30 Hand Controller Circuit Diagrams...

  • Page 15: Circuit Schematic

    Issue 1.0 16/12/99 6 CIRCUIT DIAGRAMS 6.1 Circuit Schematic HC30 PCB Assembly E02552 6.2 Component Lists and Layouts HC30 PCB Assembly Detail E02534...
  • Page 18 HC30 Hand Controller Programming & Configuration...

  • Page 19: Programming And Configuration

    Issue 1.0 16/12/99 PROGRAMMING AND CONFIGURATION This Service Manual only contains programming and configuration information for those features of the hand controller which are not normally available to the end user. For details of normal programming and configuration please refer to the user manual.

  • Page 20: Fault Finding

    HC30 Hand Controller Fault Finding...

  • Page 21: Common User Faults

    Issue 1.0 16/12/99 FAULT FINDING 8.1 Common User Faults Symptom Probable Cause Remedy Refer to autopilot manual Cannot control autopilot with Break in cable link between HC30 and for installation instructions HC30 autopilot Check cable links Check autopilot is plugged On Power Up, HC30 beeps and ¥HC30 cannot locate autopilot in and all connections are...

  • Page 22: Common Technical Faults

    Issue 1.0 16/12/99 8.2 Common Technical Faults Symptom Probable Cause Unit fails to power up Crystal failure or dry joint on crystal connection to PCB Faint display Capacitor C45 or C46 failed Unit operates normally, Diode D2 failed but display remains blank...
  • Page 23 HC30 Hand Controller Spares Packs...
  • Page 24 Page 24 Simrad Navico Spares Packs Product - HC30 Hand Remote Part No. Description Socket / NMEA Assembly HCPK01 Case Front Assembly HCPK02 Rear Case & Cable Assembly HCPK03...
  • Page 25 Page 25 Simrad Navico Spares Packs Product - HC30 Hand Remote Part No. Description PCB Assembly HCPK04 Seals Pack HCPK05...

  • Page 26: Technical Notes

    HC30 Hand Controller Technical Notes...
  • Page 27 Issue 1.0 16/12/99 10 TECHNICAL NOTES None yet issued.

Table of Contents