Table of Contents
Advertisement
How to restore the system to its default settings?
• Go to Administration > Restore/Save/Upload Setting, and
click Restore.
The following are the factory default settings:
Enable DHCP:
IP address:
Domain Name:
Subnet Mask:
DNS Server 1:
DNS Server 2:
SSID (2.4GHz):
SSID (5GHz):
Firmware upgrade failed.
Launch the rescue mode and run the Firmware Restoration utility.
Refer to section 4.2 Firmware Restoration on how to use the
Firmware Restoration utility.
Yes (if WAN cable is plugged in)
http://www.asusrouter.com (or
192.168.50.1)
(Blank)
255.255.255.0
192.168.50.1
(Blank)
ASUS_XX_2G
ASUS_XX_5G
125
Advertisement
Table of Contents
