Getting Started; Insert The Sim Card And Battery - Philips CT9A9WBLK User Manual

Hide thumbs Also See for CT9A9WBLK:
Table of Contents

Advertisement

1. Getting Started

Congratuations on your purchase and welcome to
Philips!
To fully benefit from the support that Philips offers,
register your product at www.philips.com/welcome.
Please read the safety instructions in the "Precautions"
section before using your phone.
To use your phone, you must insert a valid SIM card
supplied by your network operator or retailer. The
SIM card contains your subscription information,
your mobile phone number and a memory in which
you can store phone numbers and messages. For more
information, see "Phone Book" on page 17.

Insert the SIM card and Battery

Follow the steps below to insert your new SIM card.
Remember to switch off your mobile phone before
removing the battery.
Remove the back cover
To insert the SIM card, you must first remove the
back cover. Press on the back cover with your thumb
and slide the cover upwards. Then use your free hand
6
to lift up the door of the battery compartment as
shown below.
Remove the battery
Lift up the battery from the top to remove it.
Insert the SIM card
Insert the SIM card into one of the two SIM card
slots, making sure that the clipped corner of the card
is pointing the right direction and that the gold
contacts are facing downwards.
Getting Started

Advertisement

Table of Contents
loading

Table of Contents