Table of Contents
Advertisement
The three access settings available in this menu are the following:
Access settings
Each of these settings allows you to:
L
Change name
L
Change name
GSM settings
GSM settings
Show
- Visualise all parameters of the selected WAP profile (Gateway IP
Address, Homepage address, phone number, etc.), either GSM or
GPRS,
- Activate the selected profile (which then becomes the default profile
and is used for connection when pressing
- Change the parameters of the WAP profiles as described below.
Some pre-configured profiles might be locked, preventing re-programming.
Allows you to enter or change the name of the selected WAP profile.
,
Press
, enter the name of your choice and press
Allows you to enter or change the GMS settings and gives you access to
the following items:
-
Login
Login
and
Password
both cases, enter the information and press
Phone Number
allows you to enter the phone number needed to
establish a connection with your WAP Service Provider (ISP). Select
Phone numbers
and press
-
ISDN No.
to enter an ISDN ISP number, OR
-
Analogic No.
Enter the "+" sign followed by the number provided by your operator and
,
press
.
L
Contact your operator to know what type of number you should select.
Inactivity time
allows you to enter an inactivity time period after which
the phone automatically ends the WAP session (if a connection was in
progress) and returns to idle screen. Select
then enter a value (in second) of over 30 s. and press
-
Activate
-
Password
Phone number
allow you to enter the login and password needed. In
,
, then press
to enter an analogic number, then press
-
Change
-
),
,
to confirm.
-
Inactivity time
,
to confirm.
-
+
or
to select:
,
Inactivity time
and press
,
.
WAP services
.
,
,
73
Advertisement
Table of Contents
