Philips CT6608-000APMEA Manual page 33

Table of Contents

Advertisement

E-mail server
To configure the settings needed to connect to your e-
mail service.
The password to access your e-mail
Password
account.
Your e-mail address.
E-mail
address
The Simple Mail Transport Protocol
SMTP
address
(SMTP) address. This is the server for
your outgoing mail and is usually in a
format like smtp.yourmail.com.
The Post Office Protocol (POP)
POP3
address. This is the server for your
address
incoming mail and is usually in a format
like pop.yourmail.com.
Login
The login (or user name) to access your
e-mail account.
You must obtain the POP3 and SMTP addresses from
your e-mail service provider.
If you wish to use a GPRS connection to access your e-
mail, you may need to use the SMTP server of your
mobile service provider to send e-mails.
32
Advanced
The port number on the POP3
Port POP3
server. This is usually port 110.
The port number on the SMTP
Port SMTP
server. This is usually port 25.
DNS
The IP address of your Domain
Name Server.
address
SMTP
SMTP authentication is usually set to
Off. Contact your provider for more
authenticat.
information.
Network access
Before you can consult your e-mails, you first need to
configure your connection to the internet.
GSM Settings
When you use a GSM connection to connect to the
internet, your mobile phone dials a number provided
by your network operator and the data is sent and
received over this connection, somewhat like a dial-up
internet connection from a PC. The GSM connection
parameters are described in the table below.
Messages

Advertisement

Table of Contents
loading

Table of Contents