Do you have a question about the WD033 Base and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Welldon WD033 Base
Page 1
Do not use the ECRS in seating positions where there is an active frontal airbag installed. Ningbo Welldon Infant And Child Safety Technology Co.,Ltd. No.276 This child safety seat has passed UN Regulation No.129/03. Huangjipu Road, 山angbei Hi-tech Industrial Zone, Cicheng Town 315000 Please read the full instructions before assembling and using this product.
Contents Warning Contents ..................1 1. The rigid items and plas�c parts of an Enhanced Child Restraint Warning ..................2-3 System shall be so located and installed that they are not liable, Know your infant carr..............4-6 during everyday use of the vehicle, to become trapped by a 1.Cer�fica�on ................
Know your infant carrier Warning 7.Be sure that children are not le� in their ECRS una�ended. 8.Be sure that any luggage or other objects liable to cause injuries in the event of a collision shall be properly secured. 9.Be sure that the Enhanced Child Restraint System shall not be used without the cover.
Page 4
Know your infant carrier Know your infant carrier 7. Handle 8. Lap belt guide 9. Shade shed sha� 10. Seat shell 11. Handle adjustor 12. Diagonal belt guide 13. Headrest adjuster 15. ISOFIX connector 16. ISOFIX Release bu�on 17. Suppor t leg adjus�ng bu�on 18.
An ac�ve frontal airbag may cause death or seriously Tested and cer�fied injury of your child in an accident. according to ECE*R129 WELLDON / WD033 Base Please read the instruc�ons carefully and keep safely for future reference. There is an instruc�ons Child Safety Seat applicable size...
Securing you baby Securing you baby 3.2 Adjus�ng the handle 3. Securing you baby You can engage the adjustor in four positons 3.1 Securing your baby using the baby insert For the protec�on of your baby The baby insert gives your baby the necessary support while he or she is s�ll small.
Securing you baby Securing your baby 3.3 Adjus�ng the headrest 3.5 Securing your baby using the harness A correctly adjusted headrest ensures your baby's op�mal posture in the infant carrier. The headrest must be adjusted so that the shoulder straps are at the same level as your baby's shoulders or slightly above.
Securing you baby Installation in the vehicle 4.1 Installa�on in the vehicle 3.6 Tightening the harness Please do not leave your child una�ended in the child Pull the strap end safety seat in the vehicle. Cau�on! Pull the strap end straight towards you, not upwards or downwards.
Installation in the vehicle Installation in the vehicle 4.2 Installa�on instruc�on for STATURE 40- 87 cm, Rearward facing, ISOFIX + Support Leg+ harness. 4.2.1 Method one: First install the base on the seat , then put the infant carrier into seat Unfold support leg un�l it Match the infant carrier with the base, press the front and end of it un�l there are two locks in place.
4.3.2 Method two: Remove the infant carrier and the base from the seat together. Press the ISOFIX release bu�on to slide the ISOFIX Ensure that the handle is in its upper posi�on D connectors to separate the base and the seat. 4.3 Disassembly instruc�on 4.3.1 Method one: First remove the infant carrier from...
6.1 Care instruc�ons 5. pull the head plate to expand/Fold the canopy. To retain the protec�ve effect • In an accident at a collision speed above 10 km/h the child safety seat could suffer damage which is not necessarily obvious. •...
6.3 Method of cleaning fabric coverr 1. Take out the bu�on on the side part of the cover. 2.Take out the bu�on on the main cover. 3.Press the harness release bu�on and at the same �me pull both shoulder straps forward 4.
Cau�on! Never remove the buckle tongues from the straps. 6.6 year warranty Ningbo Welldon Infant And Child Safety Technology For this car/bicycle child seat we provide a 2-year warranty Co.,Ltd. No.276 Huangjipu Road,Jiangbei Hi-tech against manufacturing or material defects.
Need help?
Do you have a question about the WD033 Base and is the answer not in the manual?
Questions and answers