System Q LCD527 Manual

www.kovert.com
LCD527/529
Features
Range of 17" and 19" screens
Composite Video and Audio In
Video out
HDMI Input – 480p/576p/720p/1080i/1080p
VGA Input - 1280 x 1024
Built-In Audio
Sleep Timer
Stand and wall mount options
Multi-language OSD
Brightness, Contrast and Volume Controls
Black finish
These monitors are designed specifically for CCTV systems and support both composite video input
and VGA input. The monitors come complete with a stand but can also be mounted with a wall
bracket.
Safety Precautions
Please do not remove the back cover of the LCD monitor as there are no user-serviceable parts inside
and the warranty will be treated as void.
Do not place your hands, face or objects close to the ventilation openings of the monitor.
The top gets very hot from air released through the ventilation openings and may cause burns. Also do
not obstruct the ventilation openings.
Always disconnect all cables before moving the monitor as monitor connections and cable can be
easily damaged.
Please install the monitor away from excessive dust, high temperatures, moisture and direct sunlight.
Always disconnect power when cleaning the unit and do not use liquid or aerosol cleaners. Only use a
slightly damp cloth for cleaning.
If the picture displayed is abnormal, always switch off the monitor and disconnect from the power
source. Ensure the video input is correctly connected and then reconnect the power to the monitor.
Installation
1. After connecting power supply, switch on power to monitor by pressing Power button.
2. Connect the required cable (VGA, video, HDMI) to monitor and DVR, camera or device.
3. Now power up DVR, camera or device.
4. If 'No Signal' is displayed on monitor screen, check the cable connection or video input signal and
also make sure the correct video input signal is selected by pressing then Select button on the right
hand side of the monitor.
COMPOSITE
AUDIO OUT
5. Switch off the monitor after powering down the DVR, camera or device.
Email: support@kovert.com
LCD Flat Screen Monitors
IN VGA HDMI
MOVE
DC IN
Doc XLCD527
INPUT SOURCE
VIDEO
PC
HDMI
SELECT EXIT
Last Revised 24/10/2011