g. TV will show you current Version of TV and what version of firmware you're
installing.
h. After the installing progress complete, TV will restart itself again. And now
the utv upgrade is accomplished. You can go to "MenuSystemSystem
InformationVersion" for version number to check if the firmware
upgrade is successful.
2.
pkg upgrade:
For pkg upgrade, you'll receive a pkg file and the file name must be
"upgrade_loader_no_perm.pkg". However, for a secured firmware upgraded by
upgrade_loader_no_perm.pkg, this TV must be "re‐registered" on the production
NOC of ULI. You need to provide the serial number shown on the
22