Lavex 6006477KD Assembly Instructions

#6006477KD
Mat Transport and Wash Cart
Thank you for purchasing the Lavex Mat Transport and Wash Cart. This product is designed to speed up handling, cleaning,
and drying of commercial floor matting in industrial and food service environments. It is designed to hold up to (20) 7/8"
mats, or even more if the mats are less than 7/8" thick.
Safety Precautions:
NEVER:
1. Allow anyone to climb on or ride this equipment.
2. Use this product to transport any product other than floor mats recommended by manufacturer.
3. Use this equipment for any purpose other than transporting, cleaning, and drying floor matting.
4. Use this product unless all nuts and bolt assemblies are securely tightened.
5. Operate when any parts are broken, damaged, or missing.
Note: Periodically check all nuts and bolts to make sure they are securely tightened and re-tighten with the appropriate tools
as necessary.
PARTS LIST
Please make sure all parts listed below are included in this package before attempting assembly of your
Lavex Mat Transport and Wash Cart.
A. Base Carriage (1 pc)
C. Upright Supports (2 pcs)
E. Top Brace with Mounting Rods (2 pcs)
G. Nuts (40 pcs)
REQUIRED TOOLS
(2) Open-ended 13 mm wrenches
Note: for faster assembly, we recommend the use of ratchet wrenches with 13 mm sockets.
Except caster assemblies, DO NOT tighten any bolt/nut assemblies until all hardware has
been assembled.
ASSEMBLY INSTRUCTIONS
B. 4" Swivel Casters (4 pcs)
D. Bottom Brace (2 pcs)
F. Bolts (40 pcs)
H. Lock Washers (40 pcs)
01/2024