Supported Platforms - ZyXEL Communications ZyWALL USG 100 Release Note

www.zyxel.com
ZyXEL ZyWALL USG 100
Release 2.10(AQQ.0)
Release Note
Date: April 2, 2008

Supported Platforms:

ZyXEL ZyWALL USG 100
Versions:
ZLD Version : V2.10(AQQ.0) | 2008-04-02 13:53:43
BootModule Version : V1.08 | 12/04/2007 15:36:17
Files lists contains in the Release ZIP file
File name : 210AQQ0C0.bin
Purpose: This binary firmware image file is for normal system update.
Note: The firmware update may take five or more minutes depending on the scale of device
configuration. The more complex configuration will take more update time. Do not turn off or
reset the ZyWALL while the firmware update is in progress. The firmware might get damaged, if
device loss power or you reset the device during the firmware upload. You might need to refer to
Appendix 3 of this document to recover the firmware.
File name : 210AQQ0C0.conf
Purpose: This ASCII file contains default system configuration commands.
File name : 210AQQ0C0.db
Purpose: This binary file contains default system signatures.
Note: The file is only needed when doing system recovery from damage.
File name : 210AQQ0C0.doc
Purpose: This release file.
2/18
© Copyright 1995-2008, ZyXEL Communications Corp. All rights reserved.