Troubleshooting & Warranty; Before You Call For Service; Customer Service; Troubleshooting - Black & Decker BD60016 Instruction Manual

ENGLISH
TROUBLESHOOTING & WARRANTY

BEFORE YOU CALL FOR SERVICE

IF THE UNIT FAILS TO OPERATE:
A) Check to make sure that the unit is plugged in securely. If it is not, remove the plug
from the outlet, wait 10 seconds and plug it in again securely.
B) Check for a blown circuit fuse or a tripped main circuit breaker. If these seem to be
operating properly, test the outlet with another appliance.
IF NONE OF THE ABOVE SOLVES THE PROBLEM, CONTACT A QUALIFIED
TECHNICIAN. DO NOT TRY TO ADJUST OR REPAIR THE WINE CELLAR YOURSELF
IMPORTANT
DO NOT RETURN THIS PRODUCT TO THE STORE
If you have a problem with this product, please contact the
BLACK+DECKER Customer Satisfaction Center at
844-299-0879 or service@equitybrands.com
DATED PROOF OF PURCHASE, MODEL # AND SERIAL #
REQUIRED FOR WARRANTY SERVICE

TROUBLESHOOTING

Troubleshoot your problem by using the chart below. If the unit still does not work
properly, contact customer service center or the nearest authorized service center.
Customer must never troubleshoot internal components.
SYMPTOMS
The wine cellar
does not work.
Wine cellar is
not reaching
the desired
temperature
Frost forming in
the wine cellar
Page 12
POSSIBLE CAUSE
There is a power failure.
A circuit breaker has
activated.
The cellar is placed too
close to a heat source
No sufficient ventilation
The door is opened too
frequently or for a long
period of time.
Too much humidity.
The ambient
temperature is too low.
SOLUTIONS
Ensure the cellar is plugged in and
the power socket is turned on.
Reset circuit breaker.
Keep the cellar away from sunshine
or other heat sources.
Place the wine cellar in good
ventilation and keep any items away
from the fans.
Close the door tightly and do not
open the door too frequently or for a
long period of time.
Unplug to defrost, plug again after
the frost thaws.