Related Manuals for Nintendo GCP-2000
Summary of Contents for Nintendo GCP-2000
- Page 1 GCP-2000 MODEL READ BEFORE USE ENGLISH PRECAUTIONS INSTRUCTION MANUAL USB-ADAPTER Keep and retain this manual with the system.
- Page 2 Confidential This document contains confidential and proprietary information of Nintendo and is also protected under the copyright laws of the United States and other countries. No part of this document may be released, distributed, transmittied or reproduced in any form or by any electronic or mechanical means, including information storage and retrieval systems, without permission in writing from Nintendo.
-
Page 3: Important Notes On Use
GCP-2000 Model USB-ADAPTER Important Notes on Use PLEASE READ CAREFULLY BEFORE USE AND OBSERVE ALL INSTRUCTIONS. -
Page 5: Safety Precautions
Safety Precautions Be sure to read these safety notes before using the unit. They will help ensure that you use the unit safely. Icons This document uses the following icons to help you use the product safely. This icon indicates that caution is required. This icon indicates a prohibition. - Page 6 Warning Failure to observe the following warnings while operating the unit may result in death or serious injury. Do not disassemble or modify the unit. This may lead to fire or electric shock. If the unit needs to be inspected, serviced, or repaired, consult your support representative.
- Page 7 Be careful of condensation. Sudden changes of temperature can be a cause of condensation. Also beware of condensation when opening the package. Do not use the unit while condensation is present. Leave it at room temperature for several hours in an operating environment as dry as possible, to totally eliminate condensation before powering on.
- Page 8 Caution Failure to observe the following cautions while operating the unit may result in injury or damage to peripheral equipment. Do not place in an unstable location. Do not install in a location subject to vibration or an unstable location. This may lead to the unit falling and causing an accident or injury.
-
Page 9: Important Notes On Operation
If a device is connected to the Slot A or B and is not operating normally, disconnect and reconnect it, or turn the power switch on the NINTENDO GAMECUBE development box off and on again. Use only the specified interface cables, as other cables may cause failure or malfunction. - Page 10 Do not allow the unit to get wet. Do not install or store the unit anywhere excessively damp or dusty. Do not install or store the unit anywhere subject to extremes of high or low temperature. Sudden changes of temperature can be a cause of condensation.
- Page 11 USB-ADAPTER Instruction Manual GCP-2000 Model USB-ADAPTER Instruction Manual...
- Page 12 USB-ADAPTER Instruction Manual NINTENDO GAMECUBE is a registered trademark of Nintendo Co.,Ltd. The responsibility of Nintendo for product defects or any other damages directly or indirectly incurred by a customer as a result of use of the product is limited to repair of the defective item.
- Page 13 USB-ADAPTER Instruction Manual Chapter 1 Overview ........ Chapter 1 Overview ........................13 Chapter 1 Overview Chapter 1 Overview ..............................Chapter 2 Important Notes on Use........ Chapter 2 Important Notes on Use ................14 Chapter 2 Important Notes on Use Chapter 2 Important Notes on Use ........
- Page 14 USB-ADAPTER Instruction Manual...
-
Page 15: Chapter 1 Overview
USB-ADAPTER Instruction Manual Chapter 1 Overview This USB-ADAPTER allows a USB connection between a Slot on a NINTENDO GAMECUBE development box and a PC. Fig. 1 USB-ADAPTER... - Page 16 If this device is connected to the Slot A or B and is not operating normally, disconnect and reconnect it, or turn the power switch on the NINTENDO GAMECUBE development box off and on again. Use only the specified interface cables, as other cables may cause failure or misoperation.
-
Page 17: Chapter 3 Product Configuration
USB-ADAPTER Instruction Manual Chapter 3 Product Configuration 1) USB-ADAPTER 2) USB cable 3) Instruction Manual (this volume) Fig. 2 Package contents... -
Page 18: Chapter 4 Names Of Parts
USB-ADAPTER Instruction Manual Chapter 4 Names of Parts USB connector ADAPTER cable Slot connector Fig. 3 Front view Fig. 4 Rear view... -
Page 19: Chapter 5 Connection
USB-ADAPTER Instruction Manual Chapter 5 Connection Insert the Slot connector firmly into the Slot A or B of the NINTENDO GAMECUBE development box, as shown in the illustration. Fig. 5 USB-ADAPTER connection with NPDP-GDEV Next connect the USB port on the PC to the USB connector on the USB-ADAPTER, with the supplied USB cable. -
Page 20: Chapter 6 Software Installation
Chapter 6 Software Installation Communication using USB-ADAPTER requires installation of a dedicated "USB device driver" into the PC and the "USB Communication Library" into the NINTENDO GAMECUBE application. The "USB device driver" and "USB Communication Library" are included on the Dolphin SDK CD-ROM. - Page 21 Chapter 7 Restrictions If this device is connected to the Slot A or B and is not operating normally, disconnect and reconnect it, or turn the power switch on the NINTENDO GAMECUBE development box off and on again. Chapter 8 FCC...
-
Page 22: Chapter 9 Product Specifications
USB-ADAPTER Instruction Manual Chapter 9 Product Specifications Product name: USB-ADAPTER (GCP-2000) Dimensions: W 320 mm × H 27 mm × D 70 mm Weight: Approx. 300 g Rated voltage: 3.3 / 5 V Operating conditions: Temperature 10－35℃ Humidity 20－85％RH (No condensation) - Page 23 Printed in Japan 01-09-020...
Need help?
Do you have a question about the GCP-2000 and is the answer not in the manual?
Questions and answers