If you require service, contact Customer Service at 800-553-9053. Please have the following information available for all service calls: Model Number Serial Number Date and Place of Purchase Mi-T-M Corporation 50 Mi-T-M Drive Peosta, IA 52068 Manual Operation...
DIP switches on a circuit board inside the pump housing. Part Number Description Unit RC-0021-0001 Single Metering Pump, Standard on Bio-15, WTA- mounted and wired into 300SA, WTA-600SA models. biological unit control box.
INSTALLATION INSTRUCTIONS If wiring a new replacement pump onto the 12VDC power supply within a control panel- cut off wall adapter plug, and strip the wires back. Place the red wire on the + terminal and the black wire on the – terminal of the power supply. Place the power jack end on to the provided port on the circuit board inside the pump housing.
OPERATING INSTRUCTIONS PROGRAMMING: The pump may come pre-programmed already at two 6oz. doses per day. Pow- er the pump on and open the cover on the peristaltic metering pump to verify or change programming. A DIP switch in the right position is OFF and in the left position is ON.
PARTS LISTING CONTROL BOX ASSEMBLY (3-0458) RC-0021 CONTROL BOX 031521 CONTROL BOX ASSEMBLY ITEM TITLE PART # GEAR MOTOR ASSEMBLY ELECTRICAL ENCLOSURE ASSEMBLY ELECTRICAL ENCLOSURE HINGE HINGE SCREW ELECTRICAL ENCLOSURE LID (SEE 46-1861) CAPTIVE SCREW FOR ELECTRICAL ENDOSURE COVER CONTROL BOARD SCREW DRAIN MASTER ELECTRONIC CONTROL BOARD 32-1313 PUMP ENCLOSURE LID KIT (MACHINED LID, SCREWS)
Page 13
This warranty is extended only to the original buyer of Mi-T-M Corporation products. If products are altered or repaired without prior approval of Mi-T-M Corporation , this warranty is void.
Need help?
Do you have a question about the RC-0021-0001 and is the answer not in the manual?
Questions and answers