Page 3
CRW946 40min P3 Thank you for choosing this furniture. BEFORE YOU START ASSEMBLY please store the carton at room temperature for 48 hours or more so the contents can acclimatise. PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY. Information about your Pine furniture.
Page 5
28mm Ø4,5 GOLD 25mm Ø3,5 SILVER Build your furniture on a soft clean cover to stop the components getting marked during assembly. 180º 25mm Ø4,5 GOLD 28mm Ø4,5 GOLD...
Page 6
180º 28mm Ø4,5 GOLD 90º DECORATIVE METAL STUDS (optional) IMPORTANT NOTICE In environments with children or uneven floors which could cause your furniture to fall forwards we recommend that this item of furniture is attached to your wall using appropriate fixings (supplied). The RED sachet contains touch up paint for your furniture.
Page 7
WARNING: CHECK FOR HIDDEN PIPES AND CABLES BEFORE DRILLING. IMPORTANT: IF YOUR WALLS ARE NOT SOLID LIKE BRICK OR STONE, YOU WILL REQUIRE SPECIALIST FITTINGS (NOT SUPPLIED). - Place fixing strip against the wall and mark position for drilling hole. - Drill hole in your wall to a depth of 30mm using a 6mm drill bit.