Page 1
A division of Radiotronics, Inc. Model HA-2520 User Manual Serial Number KC12422 and UP Operating Instructions Radiotronics Inc. 1315 SW Commerce Way Stuart Fl 34997 Phone: (772) 600-7574...
Introduction The K9 Heat Alarm ® Pro is designed and developed by the AceK9.com™ division Radiotronics, Inc. microprocessor controlled K9 Heat Alarm Pro is a unique blend of positive features taken from field use of our K9 Heat Alarm ®...
Overview of Settings Factory default settings are based on the keeping the K9 safe in modern vehicles. Carefully consider how the vehicle operates before you change the setting to your needs. See menu choices sections. K9 Heat Alarm ® Operation Default Menu Choice Setting "Car ON Man Off'.
Operation Overview ny time the vehicle off and the K9 is left in vehicle the windows should be open and K9 alarm set to stay on with vehicle off. Frequent checks of the of K9 should be made. Snooze Mode: At start up, Snooze Mode will automatically appear if there is an over temperature another...
Alarm Modes "Pre-Alert". Pre-Alert allows time for the K9 handler to address the unsafe condition before the Full Alarm is activated. During Pre-Alert the display will show a description of the condition, the control heads lighting will flash and a warning tone sounds for 40 seconds.
Page 7
AUX Input Error: When a AceK9 Smoke Detector or Carbon Monoxide Detector Activates. the Alarm will sound, Remove the K9 from the vehicle immediately. Address the problem accordingly. See the manuals that were included with the Smoke or Carbon Monoxide Detector.
Changing Settings Light Intensity Adjustment. The light intensity of the Status Lights and the Display's backlighting is controlled by using the up and down arrows. The lights automatically dim, when the vehicle’s ignition is turned OFF. When in bright light with the ignition off the statis lights may not be visible, push the up arrow to brighten the display.
Heat Alarm Power Settings Default setting is “Car on Manual off” The Heat Alarm will turn ON with ignition and OFF by pressing [Power]. This is the safest method. The unit will automatically turn ON with the vehicle but will turn OFF when you press [Power].
Ending with a Push button test will allow testing of each of the Keys in the control head. If any of these tests fail contact you service provider or AceK9.com for further assistance. AceWatchDog Has to be activate fo this test to work.
AceWatchDog Option information The AceWatchDog is a add on to the K9 Heat Alarm Pro When a New AceWatchDog System is Connected to the K9 Heat Alarm Pro the temperature screen will alternate with AceWatchDog information screen. screen shows the cellular signal percentage serial number AceWatchDog.
Page 12
Trouble Shooting Temperature sensors read different temperatures. It is normal for temperature sensors in separate locations to read slightly different temperatures due to radiant heating of the sun, and air flow patterns. Sensor placement is critical. If the difference is extreme a relocation of the sensors may be necessary.
1) Check the Menu Setting 2) The battery power should be check that it is connected directly to the main battery of the vehicle, NOT a switched to Ignition source. AceK9.com Two (2) Year Limited Warranty For details visit http://www.AceK9.com/Warranty...
Page 16
3 The serial number for the control head will display 4 Press Up or Down Arrow see IntelaBox serial number Note The first time a System test is done the serial number is recorded in the head. All Rights Reserved AceK9.Com...