Table of Contents
Advertisement
APPENDIX
Care & Maintenance
Note this item has a sealed battery compartment. Do not
attempt to change the battery.
When batteries of different brand or type are used together,
or new and old batteries are used together, some batteries
may be over-discharged due to a difference of voltage or
capacity. This can result in venting, leakage, and rupture and
may cause personal injury.
•
Do not mix Alkaline, Lithium, standard, or rechargeable
battteries.
•
Always purchase the correct size and grade of battery
most suitable for the intended use.
•
Always replace the whole set of batteries at one time,
taking care not to mix old and new ones, or batteries of
different types.
•
Clean the battery contacts and also those of the device
prior to battery installation.
•
Ensure the batteries are installed correctly with regard to
polarity (+ and -).
•
Remove batteries from product during periods of non-use.
Battery leakage can cause corrosion and damage to this
product.
•
Remove used batteries promptly.
•
For recycling and disposal of batteries, and to protect
the environment, please check the internet or your local
phone directory for local recycling centers and/or follow
local government regulations.
Recycling & Disposal
Please consider the environment when deciding to dispose
of this product. Although household electronics are
generally safe to use on a daily basis, incorrect disposal can
cause negative and potentially irreversible impacts on our
environment.
Check with local donation centers to see if your product
can be donated for future use. If disposal is the only option,
federal agencies, local governments, and certified retailers
may have electronic recycling programs in place. Programs
may vary based on location.
FCC Statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set
forth for an uncontrolled environment and it also complies
with Part 15 of the FCC RF Rules. This equipment must
be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter
must be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-located
or operating in conjunction with any other antenna or
transmitter. End-users and installers must be provided with
antenna installation instructions and consider removing the
no-collocation statement.
Caution!
Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
If you need additional assistance, contact our
friendly customer support team:
Our representatives are available
M-F, 8am-6pm CT
Self-Help:
bit.ly/617-4817_support
Email:
bit.ly/contact_techsupport
Phone:
1.608.782.1610
Ask questions, watch set up videos, and provide feedback on our social
media outlets. Follow La Crosse Technology on Youtube, Facebook,
Instagram, and X (Twitter).
12
Designed in La Crosse, Wisconsin
•
•
•
Made in China
Printed in China
DC 031924
Scan Here
13
Advertisement
Table of Contents
