Advertisement
Quick Links
For your safety and to achieve the best possible installation of this cabinet,
James Martin Vanities always recommends you consult with a professional contractor.
Two people are required for the assembly and installation of these cabinets.
Important Notes:
This vanity cabinet may be used freestanding, or may be mounted to a wall (floating). If you are using this cab
a freestanding unit with the stainless steel legs, please follow the instructions on
pages 05 - 06 *.
If you are using this cabinet as a
wall mounted (floating) unit, please refer to
pages 01 - 04 and 06
*
.
Chicago Series Vanity: 305-V60D-GW
/ 305-V60D-SC / 305-V60D-WWW
Assembly/Installation Instructions
Materials
for
Installation:
Pencil
Tape
Measuring
Level
Step 1 Notes:
The metal mounting brackets have been pre-installed to the
backside of the cabinet 18 1/4" from the bottom of the
cabinet, remove one piece from the backside of the cabinet .
Step 2 Notes:
Draw a horizontal line on the wall at your desired height.
For this cabinet, most people use a height of 22"
Wall
Center line
A
pre-attached metal mounting
(French Cleat) brackets
（
two pieces)
a
back of vanity cabinet
B
a
b
Page: 1 of 6
Version:202304
For Warranty information, please visit jamesmartinvanities.com
Customer Service: 512-795-4171
Advertisement
