Siemens iQ700 EX375FXB5I Information For Use page 11

You can change the standard setting of the preset
power levels. You can find out how to do this in the
"Basic settings" section → Page 13.
9 Time-setting options
Your hob has various functions for setting the cooking
time:
¡ Switch-off timer
¡ Timer
¡ countUp function
9.1 Switch-off timer
You can use this function to programme a cooking
time for one or more cooking zones. The cooking zone
is automatically switched off once the time that is set
has elapsed.
Switching on Switch-off timer
Select the cooking zone and the power level.
1.
Touch twice.
2.
on the cooking zone lights up.
a
3. Within the next 10 seconds, set the required cook-
ing time in the settings area.
If you touch the first half of the settings range,
‒
the cooking time is reduced by one minute. If
you touch the second half of the settings range,
the cooking time is increased by one minute.
a The cooking time begins to elapse.
a A signal tone sounds once the cooking time has
elapsed.
Touch ⁠ .
4.
a The displays go out and the signal tone stops.
Changing or switching off Switch-off timer
Touch twice and then select the cooking zone.
1.
To delete the time, change the cooking time in the
2.
settings range or set to ⁠ .
8.2 Activating powerMove Plus
Requirement: Only place one item of cookware on a
FlexZone.
Select one of the two cooking zones in the
1.
FlexZone.
Touch ⁠ .
2.
lights up brighter and the power level for the area
a
in which the cookware is located lights up.
a The function is switched on.
Note: You can change the power levels of the zones
during cooking.
8.3 Deactivating powerMove Plus
Touch ⁠ .
▶
a The display lights up less brightly.
a The function is switched off.
9.2 Timer
Enables the activation of a timer of 0–99 minutes. This
function can be used independently of the cooking
zones and other settings. It does not automatically
switch off the cooking zones.
Switching on Timer
Touch repeatedly until
1.
lights up on the display.
a
Set the required time in the settings area.
2.
a The time starts to elapse.
a A signal tone sounds once the cooking time has
elapsed.
Touch ⁠ .
3.
a The displays go out and the signal tone stops.
Changing or switching off the Timer
Touch repeatedly until
1.
In the settings area, change the time or set to
2.
delete the time.
9.3 countUp function
The stopwatch function displays the time that has
elapsed since activation.
Switching on countUp function
Touch ⁠ .
1.
and light up on the display.
a
Then touch any symbol in the settings area.
2.
a The time starts to elapse.
Switching off countUp function
Touch ⁠ .
1.
Then touch any symbol in the settings area.
2.
a The displays for the running-time programming func-
tion go out.
a The function is switched off.
Time-setting options en
lights up.
lights up.
to
11