Table of Contents
Advertisement
BASIC OPERATIONS
OPERATION PROCEDURES BEFORE
PLAYBACK (Insertion of magazine or discs)
|
. Press POWER switch to turn power ON.
. Insert a magazine, pushing it in until a click sound
is heard.
Please insert the discs you want to play into the magazine
beforehand. (Refer to "INSERT DISCS INTO THE SUPPLIED SIX-
DISC MAGAZINE.")
PROCEDURES
AFTER PLAYING (Removal of
magazine or discs}
N=
1, Press EJECT button (4) and eject the magazine.
2. Pull the magazine forward and remove it.
3. Press POWER switch to turn power off.
OPERATION FOR NORMAL PLAYBACK (>)
3. Adjust VOLUME and tone control on the cassette
deck amplifier.
When the last track on the sixth disc finishes playing, the player
oniers stop mode. All operations stop and the player stops with
the number of the first track on the first disc "01," showing on the
indicator.
Caution:
Do not turn the power off during playback as this may damage the
disc.
| TO START PLAYING BACK FROM A DESIRED
TRACK (DIRECT DISC AND TRACK SEARCH
OPERATION)
During playback or stop mode, playback will begin from the track
selected by specifying the disc number and track number, and will
continue to the last track on the sixth disc.
Operation example:
During stop mode, to play back the third track on the fifth disc:
1, Press DISC NUMBER
button 5
2. Press
Manual/Track
search
button
(>> ->>1)
2
times.
¢ If only a disc number is selected, playback will begin from the
first track on the specified disc.
¢ If only a track number is selected, playback will begin from the
specified track on the disc for which the player is in playback of
pause mode.
* When using the remote control unit to select tracks, either track
search buttons (I=, »1) can be used.
3. Press play/pause
button (»/H) only when the
remote control unit's DISC select button is used
to select the disc.
NOTE:
© Whena
track number of a track not on the disc is selected, playback
starts from the first track.
* Track selection cannot begin from the disc number of a magazine
tray which does not contain a disc.
© Performing a direct disc search operation during random playback
causes random playback to be canceled.
° Playback from a direct disc or track search is not possible when a
program is being input in stop mode.
%
© When there is no magazine inserted and play/pause button (™
/M)
or RANDOM button, HI-LITE SCAN button or DISC NUMBER button
is pressed, "DISC"
will appear in the indicator for 2.5 seconds.
Piayback of all tracks, from the first track on the first disc, to the last
track on the sixth disc.
1. Carry out "OPERATION
PROCEDURES
BEFORE
PLAYBACK," and insert the magazine.
2. Press play/pause button (> /Il).
The
[]
indicator
will
light, and
playback
will begin.
The
indicators
will display the disc number
and
track number
currently being played and the elapsed playback time.
TO STOP PLAYBACK (m)
1. Press stop button (™) or EJECT button (4).
When
stop button (@) is pressed during normal playback, the
indicator will show the first track of the disc which was playing,
and the unit will stop. If the button is pressed again, the first
track of the first disc will be displayed.
® When EJECT button (#) is pressed, the magazine ejects.
4
<PRB1187>
Advertisement
Table of Contents
