Toshiba CF19F30 Owner's Manual page 9

ADD/ERASE function
MENU =TV/VIDEQ ¥VOLUME& YCHANNELA POWER
After performing the CH PROGRAM function, you can add or erase
specific channels.
ADV
1 Select the channel you want to erase using the CHANNEL A or V
button, or select the channel you want to add using the Channel
ye ed Number buttons.
ADV 2 Press MENU repeatedly until the Setup
MENU
menu is displayed on the screen.
3 Press ADV repeatedly until "ADD/ERASE" pane an ae
is displayed in magenta. cH LARK
TO SELECT ITEM PUSH ADV
TO CONTROL PUSH - +
4 Press <4/- or P/+:
To erase the channel
Press the button until "ERASE" is dis-
Channel played in magenta indicating that the ; debe .
Number channel has been erased from the C H L O C K E
memory. Ss
TO SELECT | TEM PUSH ADV pia
A/¥ To add the channel a
a P/+ Press the button until "ADD" is displayed £
ADV ¥ MENU in magenta indicating that the channel z
has been memorized. G
°
a.
TO SELECT !TEM PUSH ADV
TO CONTROL PUSH - +
5 Repeat steps 1 to 4 for other channels.
You have now completed the channel programming.
CABLE channel reference chart
Correspond-
ing CABLE A-8 5{A-7) 6(A-6) A B GS, apsarpeereseeseer) V W AA BB ore KX YY ZZ AAA BBB 65 _~ 66
channel
Correspond-
ing CABLE 68 GO steers 2 93 94 A-5 A-4 A-3 A-2 A-1 100 101 102s" 123° 124 125
channel
The above chart is typical of many cable system channel allocations. If in doubt, consult your cable company.