Table of Contents
Advertisement
Basic setting
InfoLight
Start programme SP:01
Tone volume
Button volume
1
Factory setting (may vary according to model)
Display text Selection
1
I:01
I:00 - I:01
1
SP:00 - SP:01
1
SL:02
SL:00 -SL:03
1
bL:02
bL:00 - bL:03
Basic settings en
Description
Switch InfoLight on or off.
While the programme is run-
ning, a spot of light is pro-
jected onto the floor below
the appliance door. This light
will not be visible if the appli-
ance is installed at eye level
with the cabinet front fitted
flush. If the appliance door is
not completely closed, the
spot of light will flash. The
programme has ended when
the spot of light is no longer
visible on the floor.
Level "I:00" switches In-
foLightoff.
Set a default programme for
when the appliance is
switched on.
¡ With the setting "SP:00",
the last programme selec-
ted is set by default when
the appliance is switched
on.
¡ With the setting "SP:01",
the Eco 50° programme
is set by default when the
appliance is switched on.
Adjustment of tone volume.
Level "SL:00" switches the
signal tone off.
If the Eco drying function is
activated, the end of the pro-
gramme is not indicated by
an audible signal tone.
Set the button volume during
operation. Level "bL:00"
switches the button tones
off.
35
Advertisement
Table of Contents
