Wireless Lan; Wan Connection - ZyXEL Communications NBG-334W Quick Start Manual

3.2 Wireless LAN

Configure your NBG334W to support a wireless network by following these steps.
1 Enter a unique Name (SSID) to identify the NBG334W on the wireless LAN.
2 Select a wireless channel. The NBG334W and other wireless clients must use the same
channel.
3 Select Auto to automatically use WPA-PSK which provides a high level of security. See
your User's Guide for information on other kinds of security. Click Next.
4 Write down the security key that displays in the pop-up screen. Computers on the wireless
network will need this security key to access the NBG334W. The security key is case-
sensitive so "ABCD" is not the same as "abcd".
Write down the security key, Name (SSID), Security and Channel
Selection for later use as the NBG334W and other devices on your
wireless network must use the same settings.
5 Click OK to continue.

3.3 WAN Connection

1 You may need to wait several minutes while the wizard attempts to detect which WAN
connection type (Ethernet, PPP over Ethernet or PPTP) you are using.
• If the wizard detects your connection type, follow the steps for your connection type as
given below.
ENGLISH
6