If a Fuse Blows
EPS (Electric Power Steering) Fuse Access
1. Turn the ignition switch to OFF (w) before checking the fuse.
2. Remove the seat (page 124).
3. Remove the rear fender cover (page 127).
4. To access the EPS fuse (1), remove the EPS fuse box cover (2).
If the EPS fuse is blown, see your dealer for this service.
5. Install the EPS fuse box cover.
6. Install the rear fender cover.
7. Install the seat.
UNDER REAR FENDER COVER
(1) EPS fuse
230
Taking Care of the Unexpected
(2)
(2) EPS fuse box cover
(1)