Table of Contents
Advertisement
en powerMove Plus
As a connected cooking zone
Recommended for cooking with just one item of cook-
ware.
¡ Position the cookware depending on the size:
¡ Recommended oblong cookware
As two separate cooking zones
Recommended for cooking with two items of cook-
ware.
You can use the front and rear zone independently of
one another, and set a separate power level for each
zone.
powerMove Plus
9 powerMove Plus
You can use this function to change the power level of
an item of cookware by simply sliding it forwards or
backwards in the flexible cooking zone. The zone is di-
vided into three areas with different power levels.
9.1 Positioning and moving the cookware
Only use one item of cookware. The cooking area de-
pends on the cookware used, as well as its size and
positioning.
Each cooking area has a preset power level:
¡ Front area = power level
¡ Middle area = power level
¡ Rear area = power level .
10
Caution
Do not place cookware in the middle between the right
and left zones. The cooking zones are not activated
correctly and you do not achieve a good cooking res-
ult.
:
8.2 Switching on flexInduction
1.
2.
a The cooking zones split or connect automatically
a The FlexZone is connected and
Notes
¡ By touching , you can manually change the set-
¡ You can change the default configuration of the flex-
¡ If you move or lift the cookware from an active con-
Place the cookware on the cooking zone.
Select the cooking zone.
depending on the size and position of the cook-
ware.
tings for the cooking zone.
ible cooking zone. You can find out how to do this
in the "Basic settings" section. → Page 15
nected cooking zone, an automatic search starts.
Each item of cookware that is found within the cook-
ing zone during this search is heated at the previ-
ously selected power level.
lights up.
Advertisement
Table of Contents
