Table of Contents
Advertisement
Quick Links
Velocity 7" Touch Panel
AT-VTP-1000VL-BL and AT-VTP-1000VL-WH
The Atlona AT-VTP-700VL is a Velocity™ 7" touch panel with side mounted LED lighting. It
features contemporary, refined styling with 1024×600 native resolution and a capacitive glass
surface. The VTP-700VL is an ideal user interface for AV control or room scheduling in corporate
and education environments. Bright, side-mounted LED's provide a visual representation of room
status or add emphasis to control functions. The panel ships with a dual-purpose one-gang wall
and glass mount kit, and its standard VESA 75 pattern provides compatibly with a wide variety
of other options. The optional AT-VTP-VTM tabletop mounting kit is available for placement on a
meeting table or lectern. The VTP-700VL features Power over Ethernet (PoE), enabling a single
network connection for data and power. Setting up the touch panel is easy, with room scheduling
and AV control GUIs automatically uploaded from the Velocity hardware or software server
gateway during system configuration.
Package Contents
1 x AT-VTP-700VL-BL
1 x Wall/Glass mount
4 x Mounting screws
2 x Safety screws
Operating Notes
•
The Velocity 7" Touch Panel (AT-VTP-700VL-BL) must be on the same network as the
Velocity Gateway (AT-VGW-HW or AT-VGW-SW) or it will be unable to sync for control.
•
The AT-VTP-700VL is PoE capable, to power the unit, simply plug it into a 802.3at
compatible network switch. If the network switch is not PoE capable, a PoE injector
(purchased separately)
IMPORTANT: Velocity Gateway (AT-VGW-HW or AT-VGW-SW) must be set up before the
AT-VTP-700VL is fully functional.
can be used.
1 x Glass mount cover sticker
2 x Glass mount adhesive strips
1 x Installation Guide
1
Installation Guide
AT-VTP-700VL-BL
Advertisement
Table of Contents
Related Manuals for Panduit ATLONA Velocity AT-VTP-1000VL-BL
Summary of Contents for Panduit ATLONA Velocity AT-VTP-1000VL-BL
- Page 1 Installation Guide AT-VTP-700VL-BL Velocity 7” Touch Panel AT-VTP-1000VL-BL and AT-VTP-1000VL-WH The Atlona AT-VTP-700VL is a Velocity™ 7” touch panel with side mounted LED lighting. It features contemporary, refined styling with 1024×600 native resolution and a capacitive glass surface. The VTP-700VL is an ideal user interface for AV control or room scheduling in corporate and education environments.
-
Page 2: Mounting Instructions
Installation Guide AT-VTP-700VL-BL Mounting Instructions The AT-VTP-700VL has three mounting options. In-wall, an optional stand (AT-VTP-VTM, available through atlona.com), and a flush mount kit (AT-VTP-FMK-7-BL, available through atlona.com). In-wall Connect the included mounting screws into the back of the wall plate. Do not over-tighten the screws, as they should stick out a few mm from the wall plate for affixing to the wall/ glass mount. - Page 3 Installation Guide AT-VTP-700VL-BL Affix the wall/glass mount to the back box. This will differ per region.
- Page 4 Installation Guide AT-VTP-700VL-BL...
- Page 5 Installation Guide AT-VTP-700VL-BL Align the screws on the back of the wall plate with the four large holes and slide them onto the mounting plate.
- Page 6 Installation Guide AT-VTP-700VL-BL Insert the included safety screws into the top of the mounting plate, this will lock the mounting screws into places. NOTE: Tighten the screws by hand. To avoid damage to the touch panel, do not overtighten.
- Page 7 Installation Guide AT-VTP-700VL-BL Glass Mounting Connect the included mounting screws into the back of the wall plate. Do not over-tighten the screws, as they should stick out a few mm from the wall plate for affixing to the wall/ glass mount. Remove the paper from one side of the double-sided tape and affix it to the back of the mounting plate.
- Page 8 Installation Guide AT-VTP-700VL-BL Insert the included safety screws into the top of the mounting plate, this will lock the mounting screws into places. Table Mount (AT-VTP-VTM purchased separately through atlona.com) Place the stand on the table/desk Align the screw holes on the back of the wall plate with the holes on the adjustable stand. Use the mounting screws included with the VTP-VTM and thread them through the back of the stand into the wall plate.
- Page 9 Installation Guide AT-VTP-700VL-BL Flush Mount KIT (AT-VTP-FMK-7-BL purchased separately through atlona.com) The optional AT-VTP-FMK-&-BL is available to purchase from https://atlona.com/product/at-vtp- fmk-7-bl/ and provides a way to install the VTP-700VL flush with the wall.
-
Page 10: Installation And Setup
Installation Guide AT-VTP-700VL-BL Installation and Set Up NOTE: Installation of the Velocity Touch Panel can only be done after the VGW-HW has been set up. View the AT-VGW-HW Installation Guide and Velocity Manual for instructions. Connect the Ethernet cable into the back of the unit. If the Ethernet cable is connected to a non PoE switch, use a PoE injector using 802.3at (purchased separately). - Page 11 Installation Guide AT-VTP-700VL-BL Navigate to the room the VTP will be located in. Select the + button to add the unit. Type the SKU into the search field and select the correct panel from the drop down. Select the Edit button on the tile to open the unit settings. Select the ADD button.
- Page 12 Installation Guide AT-VTP-700VL-BL Depending on the room options there may be multiple buttons on the home page. Select the any icon to open the room’s control page. NOTE: The room must be completely set up to receive the control interface. Select sources and displays by tapping on them or dragging and dropping the source on the display.
-
Page 13: Advanced Settings
Installation Guide AT-VTP-700VL-BL Advanced Settings Once the touch pad has been set up, the settings can be changed or reset only through the advanced settings. To access the settings, swipe from the left side of the touch pad to the right. Select Advanced Setup. - Page 14 Installation Guide AT-VTP-700VL-BL Within the panel settings, it is suggested to only change Ethernet and Time settings. Select System, then Date & Time to update the panel time settings. Automatic date & time - Enable or disable to have the time automatically update through the NTP Server.
-
Page 15: Firmware Updating
Installation Guide AT-VTP-700VL-BL Firmware Updating The touch panel is updated through Velocity. You can either download the firmware from atlona. com or through Velocity. Locate the ≡ in the top left corner of the home page and left click to open the menu. Select Settings from the menu. -
Page 16: Warranty
Installation Guide AT-VTP-700VL-BL Warranty To view the product warranty, use the following link or QR code: https://atlona.com/warranty/. English Declaration of Conformity The English version can be found under the resources tab at: https://atlona.com/product/at-vtp-700vl-bl/. Chinese Declaration of Conformity 中国RoHS合格声明 由SKU列出於: https://atlona.com/about-us/china-rohs/. International atlona.com 408.962.0515...