LG DL 740 E Series Owner's Manual page 19

completely into the hinge assembly on
the right. Slide the lock rod back and forth
to make sure it is correctly positioned in
the guides and slides easily.
10
Reverse the lower hinge bracket and
i
hinge assembly.
1) Remove the screw from the
hinge bracket (on the right) and lift the
hinge bracket out. Set it aside. Remove
the two screws from the
assembly on the bottom left and lift the
hinge assembly out.
2) Rotate the lower hinge assembly 180
k
degrees and install it on the right side
using the two screws removed in a
previous step.
3) Flip over the
i
release the tabs on the back locking the
hinge filler to the hinge bracket.
e
k
lower
i
lower hinge
k
lower hinge bracket and
4) Rotate the hinge 180 degrees and snap it
back onto the front of the hinge bracket
facing in the opposite direction.
5) Mount the lower hinge bracket and the
filler on the left side of the door with the
screw removed in a previous step.
11
Install the side lock rod.
f
• Flip the side lock rod over and install it on
the opposite side. Insert the lower end into
the left hinge and lower the rod into the
guides on the door while compressing the
spring inside the recess.
• Make sure the top of the side lock rod is
beside the top lock rod and the two do not
overlap each other, so the two rods can
interact correctly. If they are not aligned
properly, the door will not operate properly.
12
Reinstall the side interlock button.
d
• Reinstall the side interlock button
d
removed in step 3. Center the spring in the
INSTALLATION 19