Assembly Instructions; Remote Control Instructions - Nature's Sleep GHOTBED Owner's Manual

ASSEMBLY INSTRUCTIONS

1. Open the box.
2. Remove the power unit accessory box and topper. Place the accessory box on a flat surface,
taking care not to drop it. Lay the topper flat on the bed or on a clean, flat surface
3. Uncover the topper vacuum bag: Carefully cut the topper vacuum bag with scissors, taking
care NOT to cut the topper. Check the spare parts: carefully take out the spare parts box, and
count the spare parts.
4. Insert the black tube from the topper into the power unit, making sure the hose connector is
flush with the housing. When the topper is ready to use. Insert the round end of the power
adapter into the round hole at the end of the power unit and insert the square end of the
adapter into the 120 volt outlet.
5. Removable washable cloth cover: can be laid according to actual needs, the open end
(including binding) and the thin pad square plastic parts at the same end. When using the
cloth cover, be careful not to knock the head on the square plastic box where the head of the
thin pad is.

REMOTE CONTROL INSTRUCTIONS

Power
Vibration
Stretch
Sleep Aid
Shoulder & Back
Thigh & Lumbar
INTENSITY
- 5 -
Pause
Heating
Wave
Meditate
Leg
Timer