Sage DUNTON HOUSE ROE EXTERIOR SCONCE E26 Installation Manual

IMPORTANT SAFETY PRECAUTIONS
Before you begin, read these instructions completely and carefully.
• Be certain electrical power is OFF before and during installation, maintenance and removal.
• Luminaire wiring must be properly grounded in accordance with the NEC and any applicable local code requirements.
• Use only UL or IEC approved wire for input/output connections.
• Verify that supply voltage matches voltage on luminaire label. Installation to any other connection may void the warranty.
• Wear gloves during installation to prevent injury and do not expose wiring to metal or sharp edges.
• Do not install in areas subject to combustible vapors or gases. Verify luminaire location ratings are suitable for installation environment (refer to specification sheet as needed).
• Do not restrict luminaire's ventilation by covering with material that will cause luminaire to overheat and potentially shorten the life span.
• Ensure LED luminaire has the correct polarity before installation.
ELECTRIC SHOCK FALLING PARTS
ABRASIONS
WARNING: To reduce the risk of personal injury or property damage from fire, electrical shock, falling parts, abrasions, burns
and all other hazards, read all provided warnings and follow installation instructions.
This product should be installed, inspected and maintained by a qualified and licensed electrician. Installation of luminaire
must be in accordance with NEC and local code requirements.
BURNS
SAVE THESE INSTRUCTIONS
SPECIFICATIONS AND DETAILS ARE SUBJECT TO CHANGE WITHOUT NOTIFICATION. CONTACT SAGE BRANDS FOR UP TO DATE DETAILS.
DUNTON HOUSE DECORATIVE LIGHTING - A DIVISION OF SAGE BRANDS • DH.LIGHTING | SAGE BRANDS • SAGE.LIGHTING
Installation Manual
ROE EXTERIOR SCONCE E26
1
REV 2024 0225