Wiring; Setting Up; Installation And Linking - Philips WelcomeEye Look User Manual

2. Slide the textile-covered front portion downward to completely remove it from the camera.
3. Turn around the textile-covered front portion with the logo.
4. Follow the steps in reverse order to carefully reinstall the textile-covered portion.
5. On the ceiling, mark the location of the 2 holes for the ceiling mounting of your camera. Drill the
holes.
6. Insert the wall plugs provided.
7. Attach the base using the 2 screws provided. The screws and plugs supplied are suitable for solid
material; you may need to adapt the fastening to your particular substrate.
8. Place the camera on the base and lock it into place by turning it.
5.2. Power supply
Once the camera has been installed (placed on a piece of furniture or mounted on the ceiling),
connect the mains adapter to power the device.
1

6. Setting up

6.1. Installation and linking

the screenshots below are from the
Note:
Android version of the application. The iOS
version is identical.
Download the Philips WelcomeEye
application on your iPhone or Android
smartphone.
2
WelcomeEye for Android
WelcomeEye Look / V3
3
WelcomeEye for iOS
5