Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for XAG GC4000+
Summary of Contents for XAG GC4000+
- Page 1 GC4000+ Auto Super Charge Station User Manual Version 1.0...
- Page 2 To Users Thank you for choosing XAG products. For safety purposes and to ensure the best experience possible, XAG recommends reading through the User Manual and Disclaimer contained in this document before attempting to use the GC4000+ Auto Super Charge Station.
-
Page 3: Product Profile
XAG’s Smart Batteries when there is no accessible electricity in the field XAG™ GC4000+ Auto Super Charge Station is designed to provide a rated charging power of 3400W for simultaneous charging of two batteries, charging current is automatically adjusted depending on the Smart Battery model. - Page 4 Understanding the GC4000+ Auto Super Charge Station Structure 1. Fuel Tank 2. Fuel Switch 3. Fuel Tube 4. Generator Control 5. Oil sensor 6. Engine Oil Gauge 7. Shock-Absorbing Block 8. Muffler 9. Spark Plug 10. Frame 11. Carburetor 12. Generator Fairing 13.
-
Page 5: Control Panel
Control Panel Emergency Maintenance Stop LCD Screen Indicator Operation ON/OFF Indicator Button Emergency Stop Switch Before using the device, please make sure that the red emergency stop switch on the left side of the control panel is in the pop-up state (Turn the emergency stop switch clockwise, the switch will pop up). -
Page 6: Lcd Display
LCD Display The LCD display alternately displays the cumulative running time of the equipment and the time for the next oil change (3s Interval). If there is a fault, the LCD screen will only display the fault code. Check the meaning of the fault codes in the table below: Fault Codes Descriptions Solutions... - Page 7 The default charging adapter of XAG™ GC4000+ Auto Super Charge Station is only applicable for the XAG B13960S Smart Battery. If you need to use this product for other B-Series batteries, please contact your nearest distributor for the appropriate adapters.
-
Page 8: Charging Station Operation
Turning the Charging Station ON 1. Turn ON the Battery, 2. Turn ON the Switch button (Right side of the Control Panel) The charging station will start up and enter the normal working mode Note IF the ignition fails, the red maintenance indicator will light up, turn the switch OFF and ON again, and the overcharge station will re-ignite and should start. IF the ignition fails after serval attempt, 1. Turn OFF the Switch, and the Battery 2. Perform inspection of the Charging Station a. Ensure sufficient fuel b. Check Charge Controller 3. After troubleshooting the Charging Station 4. Turn ON the Battery, 5. Turn ON the Switch button on Charging Station Control Panel The charging station will start up and enter the normal working mode IF the Switch is ON, but the Charging Station in shutdown state 1. Connect and Turn ON the Battery 2. Re-execute the Off and ON switch button on Charging Station Control Panel to reactivate the charging operation Charging Station Operation Under normal operating conditions, when the Battery is connected and turned ON, the Charging... -
Page 9: Maintenance
Turning the Charging Station OFF Manual Shutdown • Turn OFF the Switch or • Press the Emergency Stop switch Automatic Shutdown • After 1 minute of idling after battery is fully charged • After 1 minute of idling when the battery is disconnected or turn off the battery during the charging process •... -
Page 10: Technical Specifications
Technical Specifications Model Name: GC4000+ Number of Cylinders Diameter of Cylinders 70mm Piston Stroke 58.5mm Compression Ratio 8.5:1 Total Displacement 223cc Rated Output 3400 Watts Max Output 5100 Watts Air Intake Natural respiration Ignition Spark Ignition Start Method Electrical Engine Oil Capacity 600ml Fuel Tank Capacity No-Load Speed... - Page 11 It is prohibited to use the Charging station for non-XAG Smart Batteries. The Charging Station can only be used to charge Batteries manufactured by XAG. XAG will not be liable for any loss, whether such loss is direct, indirect, special or consequential, suffered by any party as a result of their improper use of the Charging station, the user will be solely responsible for any damage that results from such activities.
- Page 12 XAG will not be liable for any corresponding legal responsibility. 5. To the maximum extent permitted by law, XAG shall not be liable for any and all losses caused by users' failure to use the product in accordance with this document and the “Product Manual/User Manual”...
- Page 13 Certificate of Inspection This product has passed inspection. www.xa.com/en...
- Page 14 All information of this User Manual (including but not limited to any text description, illustrations, photos, methods and processes, etc.) belongs to XAG Co., Ltd. and is protected by copyright law. Without written authorization, no individual or institution is allowed to reproduce, extract, translate, distribute, or otherwise reproduce or quote any...