Advertisement
Quick Links
How to Use:
To cut cables, fully open
1
up the multi-tool arms
(approx. 135° A) and run
your cable through the
cutting blade B. Once the
cable is aligned correctly,
close the arms to cut.
~135
°
To crimp, put a lobed washer and crimp sleeve on your cable line. Open the arms, line up the
2
C
crimping jaws
near the end of the crimp sleeve and close. Crimp on each side.
PRO TIP: For easiest use, rest one of the crimper arms on your
hip while cutting or crimping. You can also use wood scraps
and rubber clamps to hold your multi-tool in place while in use.
CUT & CRIMP MULTI-TOOL
IMPORTANT: Before each use, make sure your crimper's
side bolt is tight. A loose bolt will prevent the crimping jaws
from closing fully and result in insecure crimps. You can
tighten the bolt with a 3/16 Allen key.
FIRST CRIMP
SKU CB- 0 -.218HEX WC
CUTTING CABLE
D
SECOND CRIMP
Video Tutorial
Advertisement
Summary of Contents for Cable Bullet CB-0-.218HEXWC
- Page 1 CUT & CRIMP MULTI-TOOL SKU CB- 0 -.218HEX WC How to Use: To cut cables, fully open up the multi-tool arms IMPORTANT: Before each use, make sure your crimper's (approx. 135° A) and run side bolt is tight. A loose bolt will prevent the crimping jaws your cable through the from closing fully and result in insecure crimps.
- Page 2 To Sharpen Cutting Blade: PRO TIP: Make sure the arms are slightly open during sharpening process to release tension between the pins and cutting blades. IMPORTANT: Front back plates must flipped refastened one at a time to prevent internal mechanisms from falling out.