Table of Contents
Advertisement
Preparation
for using
your
new TV
Connecting
your
TV
Caution: Do not plug in the TV until you have finished connecting
all of your equipments.
Connecting
to an antenna
To enjoy the televison
program
transmitted
by your local TV station, you need an indoor or outdoor
antenna (not supplied). An outdoor antenna is necessary for a perfect picture quality, If you are a
subscriber of your local CATV net, the outdoor
or indoor antenna is not needed. Connect the equipments
as shown below.
ANTENNA
Plug (not supplied)
COAXIAL
CABLE
(750)
SOCKET
ANT 750
Connecting
to AiV
equipments
To enjoy the multimedia
features, you can connect your TV to A/V equipments
such as VCD, DVD, STB,
Satellite receiver, Camcorder, Audio amplifier etc., and select signal source using your remote control.
Connect RCA audio cables to "R -AUDIO - L" on the rear of your set and the other ends to corresponding
audio out connectors on the A/V device.
NOTE: 1. Headphones are not included.
2. No sound will be heard from the main unit speakers whena
headphone mini-plug
is
connected into the headphone jack,
Service
jack-RS232
Connector for service only (do not connect any equipment here).
Connecting
component
devices (DVDiPVR)
Connect Component video and audio cablesto Component inputs CPR/CR'; "PB/CB'; "Y") on the rear of your set
and the other ends to corresponding component video out connectors on the PVRor DVD.
8
Advertisement
Table of Contents
