Advertisement
Quick Links
Tools Needed
#1 Phillips Screwdriver
*** The phone holder can be installed on any Elevate E-Bike ***
STEP 1
NOTE:
This Phone holder will not hold any
phone over 3.5 inches wide.
Remove and retain the screw from the clamp,
using a 1# Phillips Screwdriver.
Phone Holder
Part #7005
Included
Phone Holder
V1
Advertisement
Summary of Contents for ELEVATE 7005
- Page 1 Part #7005 Tools Needed Included #1 Phillips Screwdriver Phone Holder *** The phone holder can be installed on any Elevate E-Bike *** STEP 1 NOTE: This Phone holder will not hold any phone over 3.5 inches wide. Remove and retain the screw from the clamp,...
- Page 2 STEP 2 Place the clamp around the handlebars. insert the retained screw from Step 1, then tighten with a #1 Phillips head screwdriver. STEP 3 To insert phone, press the button on the side to release the side clamps and unfold the two mounts at the bottom for the phone to rest on.
Need help?
Do you have a question about the 7005 and is the answer not in the manual?
Questions and answers