Page 1
(Front side) Turn Master Multi (Back side) HMI no. Article no. Name - Size UDI-DI/GTIN MC 001-9040 39010 Turn Master Classic - S 5744001971758 MC 001-9041 55563 Turn Master Multi - S 5744001973363 MC 001-9050 39011 Turn Master Classic - M...
Page 2
Never leave a user with a poor sitting balance alone on the edge of master care A/S and our distributors take no responsibility for per- the bed sitting on a Turn Master as this increases the risk of the user sonal injuries or product damages if the product(-s) have been used sliding onto the floor.
Getting into and out of the car seat: 1. If you only need Turn Master to rotate, the 2. If you need Turn Master to move the seat sec- 3. Now place Turn Master on the car seat with Velcro straps on the underside of the non-slip tion from the edge of the car seat into the middle the non-slip part at the bottom.
17. The user then rolls his body to the opposite 18. The user takes hold of Turn Master behind both sliding parts of Turn Master and roll this in side, i.e. over the rolled up Turn Master. the back, folds it and pulls it away from the body.
For more information, videos Quick Guide etc., visit www.master-care.dk master-care.dk master care A/S, Sofienlystvej 3, DK 8340 Malling, Denmark HUMAN HANDLING CONCEPT Reservations are made for printing errors. Tel. +45 86 93 85 85, E-mail: info@master-care.dk We support the Sustainable Development Goals...
Need help?
Do you have a question about the Turn Master and is the answer not in the manual?
Questions and answers