Kenwood TK-780 Series Instruction Manual page 20

Hz Transmitting
1 Select your desired:system and group (or group and channel). ~~
2 Press the A key to enter Selcall Mode.
3 Use the W/" keys (right side keys only) to select the ID I the station
you want to call.
e You can also enter digits by using the DTMF keypad if Manual Dial is enabled.
_(Press .%-to.erase an incorrect digit.) . :
Pres the A or # key to enter Status Mode.
The mail icon ( 4 ) will flash and a calling ID or text message will appear. -
when a Status call is received.
m Reviewing Messages in the Stack Memory
Press the SCN key to toggle between the message and the caller's ID.
5 To erase the nieesse press and hold the SCN key for more than =
Second.
| Automatic Status Response
If you pre- -select a status number and then leave the. transceiver in Status
, . Mode, the transceiver will automatically respond with that status. number
when.a request from the base. station is received. (The base station request
function is optional.)
ae