Feasycom FSC-SYR20D Quick Start Manual

parameter
Project
Operating 125Khz
frequency
Read type TK4001, EM4100 and other ID cards
Operating voltage 5V
Reading distance 0~80mm
Reading speed 0.2s
Dimension 104mm×68mm×10mm
Communication USB
interface
Operating -20℃~70℃
Temperature
Operating current 100mA
Reading time
＜100ms
Reading distance 0.5S
Weight About 140g
Operating System Win XP\Win CE\Win 7\Win 10\LIUNX\Vista\Android
Other Status Indicator: 2-colour LED ("red" power LED, "green" status indicator)
Built-in Speaker: Buzzer, LED and Buzzer can be controlled.
Output Format: Support customized format
1.Use/Installation
① Connect one end of the cable to the corresponding interface of the computer, and the other end to the communication port of the card
reader, and the card reader will enter the self-test and initialization from the "drop" sound;
② when the card reader indicator is "red", to indicate that the reader is waiting for the card state.
Note: test reader to read the label method: open the computer's output software (such as: Notepad \ WORD \ EXCEL and other editors), will
be close to the card reader, the output software at this time the cursor shows the label card number.
Shenzhen Feasycom Co.,Ltd
FSC-SYR20D
reader
Introduction :
FSC-SYR20D card reader is a 125kHz driver-free ID card reading
device. In the process of using, you can dial and plug at will (plug and
play), without external power supply, the user does not need to load any
driver, can read out the serial number in the RFID card and output it to
the computer through the data interface, which is equivalent to the
automatic keyboard losing number.
Application areas:
Data entry, information enquiry, cyber cafe registration, book
borrowing, meeting check-in, access control and other fields.
Basic parameters:
Usage and precautions:
card
www.feasycom.com