Page 1
& garden tools. ASSEMBLY HARDWARE HELPFUL HINTS The 6500 will require approximately 30 minutes to assemble with common hand tools. Remove and identify all loose parts from carton. Clean and dry your Cultivator thoroughly after each use.
Page 2
Assembly and Operation Instructions ASSEMBLY INSTRUCTIONS 1. Assemble both Upper (Key #4) and Lower Handles (Key #3) together by sliding the Lower Handle into the Upper Handle. Secure with a 5/16-18 x 1 ½” hex bolt (Key #12) and a 5/16” hex nut (Key #15). Tip: Do not tighten all the way.
Page 3
Assembly and Operation Instructions HOW TO ORDER PARTS Call or Email: TURF DEPOT 800-305-9255 or earthway@turfdepot.com PARTS KITS (see diagram below) PARTS KIT DESCRIPTION WHAT IS INCLUDED 6503 HARDWARE AXLE (5), TOOL SUPPORT SPACER (9), NUTS, BOLTS, WASHERS (10-20), AND TINES...
Page 4
EarthWay. Due to the corrosive nature of most fertilizers and ice melt products, EarthWay Products, Inc. makes no warranty against and specifically excludes part(s) or product degradation or failure due to corrosion or its effects .
Need help?
Do you have a question about the 6500 and is the answer not in the manual?
Questions and answers