Table of Contents
Advertisement
Quick Links
Three Feature Swing Set
For illustrative purposes only.
Do not forget to try these other fi ne Intex products: pools, pool
accessories, in-home toys, airbeds and boats available at fi ne
retailers or visit our website.
Due to a policy of continuous product improvement, Intex reserves
the right to change specifi cations and appearance, which may
result in updates to the instruction manual without notice.
®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays
sous licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet
in einigen Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Development Co. Ltd., Hong Kong &
Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European Union by/Distribué dans
l'Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/Intex Trading B.V.,
Ettenseweg 46, 4706 PB Roosendaal – The Netherlands • Distributed in the UK by Unitex Service (UK) Limited, 21
Holborn Viaduct, London EC1A 2DY, UK.
www.intexcorp.com
(361IO) SWING SET ENGLISH 7.5" X 10.3" PANTONE 295U 12/04/2023
IMPORTANT
SAFETY RULES
Please read, understand, and follow all
instructions carefully before
installing and using this product.
Keep for future reference.
©2024 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle
Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/
Gedruckt in China.
361
English
A
361-*A*-R2-2412
Advertisement
Table of Contents
Related Manuals for Intex 44121
Summary of Contents for Intex 44121
- Page 1 Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Development Co. Ltd., Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European Union by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/Intex Trading B.V.,...
-
Page 2: Table Of Contents
(361IO) SWING SET ENGLISH 7.5” X 10.3” PANTONE 295U 12/04/2023 English TABLE OF CONTENTS Warning..................Parts....................Set-up..................... 8-18 Assembly preparation..............Assembly of top beams and quick hooks......... 9-10 Assembly of legs................11-12 Assembly of glider................ 13-16 Assembly of chain swings............17 Anchor mounting................ -
Page 3: Warning
(361IO) SWING SET ENGLISH 7.5” X 10.3” PANTONE 295U 12/04/2023 English IMPORTANT SAFETY RULES Observing the following statements and warnings reduces the likelihood of serious or fatal injury. Review these safety rules regularly with your children. READ AND FOLLOW ALL INSTRUCTIONS WARNING •... -
Page 4: Parts
PARTS Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. NOTE: Drawings for illustration purpose only. Not to scale. MODEL 44121 MODEL 44123 REF. NO. DESCRIPTION QTY. PART NO. - Page 5 (361IO) SWING SET ENGLISH 7.5” X 10.3” PANTONE 295U 12/04/2023 English PARTS (continued) Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. Hardware components (A-frame) Verify that all the parts and sub-assemblies are accounted for, and carefully arrange the parts per below drawings. Top leg (x4) [G1] Bottom leg (x4)
- Page 6 (361IO) SWING SET ENGLISH 7.5” X 10.3” PANTONE 295U 12/04/2023 English PARTS (continued) Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. Hardware components Verify that all the parts and sub-assemblies are accounted for, and carefully arrange the parts per below drawings. [H1] Long bolt M10 x 80mm (x4) [H12]...
- Page 7 (361IO) SWING SET ENGLISH 7.5” X 10.3” PANTONE 295U 12/04/2023 English PARTS (continued) Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. Hardware components (Glider) Verify that all the parts and sub-assemblies are accounted for, and carefully arrange the parts per below drawings. [S1] Glider seat assembly (x1) [S2]...
-
Page 8: Set-Up
(361IO) SWING SET ENGLISH 7.5” X 10.3” PANTONE 295U 12/04/2023 English SET UP Site preparation and requirements • Place the product on level ground, with at least a 2m (6ft) space from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, lamp post, or electrical wires. -
Page 9: Assembly Of Top Beams And Quick Hooks
(361IO) SWING SET ENGLISH 7.5” X 10.3” PANTONE 295U 12/04/2023 English SET UP (continued) ASSEMBLY OF TOP BEAMS H11 (x4) H12 (x4) H4 (x4) H5 (x4) Important: assemble the center swing beam (E) with the round holes at the top and the oval openings at the bottom! S AVE THESE INSTRUCTIONS Page 9... - Page 10 (361IO) SWING SET ENGLISH 7.5” X 10.3” PANTONE 295U 12/04/2023 English SET UP (continued) ASSEMBLY OF QUICK HOOKS H12 (x4) H5 (x4) H4 (x4) H14 (x4) S AVE THESE INSTRUCTIONS Page 10...
-
Page 11: Assembly Of Legs
(361IO) SWING SET ENGLISH 7.5” X 10.3” PANTONE 295U 12/04/2023 English SET UP (continued) ASSEMBLY OF A-FRAME - Top legs (A) H11 (x8) H12 (x8) H4 (x8) H5 (x8) H12 H5 ASSEMBLY OF A-FRAME - Cross bars (F) S AVE THESE INSTRUCTIONS Page 11... - Page 12 (361IO) SWING SET ENGLISH 7.5” X 10.3” PANTONE 295U 12/04/2023 English SET UP (continued) ASSEMBLY OF A-FRAME - H1 (x4) H12 (x4) Anchor foot bases (G1) H4 (x4) H5 (x4) ASSEMBLY OF A-FRAME - H11 (x4) H12 (x4) Bottom legs (B) H4 (x4) H5 (x4) S AVE THESE INSTRUCTIONS...
-
Page 13: Assembly Of Glider
(361IO) SWING SET ENGLISH 7.5” X 10.3” PANTONE 295U 12/04/2023 English SET UP (continued) ASSEMBLY OF GLIDER - Glider bottom legs (S3) and glider seat assembly (S1). It’s very important to use the correct parts. Do not use the insert bearings (S8) ! (x6) (x6) S AVE THESE INSTRUCTIONS... - Page 14 (361IO) SWING SET ENGLISH 7.5” X 10.3” PANTONE 295U 12/04/2023 English SET UP (continued) ASSEMBLY OF GLIDER - Push long barrel nut (H6) into the holes securing the glider bottom leg (S3) to the glider seat assembly (S1). H8 (x2) H9 (x2) H4 (x2) H6 (x2)
- Page 15 (361IO) SWING SET ENGLISH 7.5” X 10.3” PANTONE 295U 12/04/2023 English SET UP (continued) ASSEMBLY OF GLIDER - Glider top legs (S2) H8 (x2) H9 (x2) H7 (x2) S AVE THESE INSTRUCTIONS Page 15...
- Page 16 (361IO) SWING SET ENGLISH 7.5” X 10.3” PANTONE 295U 12/04/2023 English SET UP (continued) ASSEMBLY OF GLIDER - Hold the glider assembly up to the bracket on the top beam. Make sure the insert bearings (S8) are in place and secure the glider to the beam bracket with short barrel nut (H7). H8 (x2) H9 (x2) (x4)
-
Page 17: Assembly Of Chain Swings
(361IO) SWING SET ENGLISH 7.5” X 10.3” PANTONE 295U 12/04/2023 English SET UP (continued) ASSEMBLY OF CHAIN SWINGS - Hang the chain swings (C1) to the quick hooks (H14). S AVE THESE INSTRUCTIONS Page 17... -
Page 18: Anchor Mounting
(361IO) SWING SET ENGLISH 7.5” X 10.3” PANTONE 295U 12/04/2023 English SET UP (continued) ANCHOR FOOT BASES MOUNTING - Angle between horizontal level ground and anchor rod (G2) 1. Secure anchor foot bases in concrete (not included). Level Swing Set and mark anchor foot base locations. -
Page 19: Maintenance
(361IO) SWING SET ENGLISH 7.5” X 10.3” PANTONE 295U 12/04/2023 English MAINTENANCE IT IS IMPORTANT TO CHECK AND TIGHTEN ALL HARDWARE AT THE BEGINNING AND DURING THE SEASON. At the beginning of each play season: • Tighten all hardware. • Lubricate all metallic moving parts. •... -
Page 20: Warranty
Other than this warranty, and other legal rights in your country, no further warranties are implied. To the extent possibly in your country, in no event shall Intex be liable to you or any third party for direct or consequential damages arising out of the use of your Intex Three Feature Swing Set, or Intex or its agents’...
Need help?
Do you have a question about the 44121 and is the answer not in the manual?
Questions and answers