Repairs/Replacements
Replacing the Fingertip - Due to wear and tear, a
fingertip may become damaged and need to be
replaced. Fingertips are available as replacement
parts.
Secure finger and using a
dremel tool cut a channel
down the length of the tip.
Take caution to not cut in to
titanium.
Apply a small amount of
super glue on either side of
the inner surface of the tip
Wedge a flat-edge screw
driver into the slot created
and pry tip off finger tip.
Press fingertip onto finger
and hold in place until glue
sets. Use rubber padding to
prevent slipping.