Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Aumuller VRS Click
Summary of Contents for Aumuller VRS Click
- Page 1 Instruction for Installation and Commissioning Vent Radio System...
-
Page 2: Table Of Contents
Teach-in VRS Click and VRS Remote • Teach-in VRS RainSens and VRS Remote 8 + 9 • Link / transfer VRS Click and VRS RainSens Commissioning with CODE-ID • Insert VRS Click in the Aumüller drive • Teach-in VRS Click and VRS Remote •... -
Page 3: Warning And Safety Symbols
Preliminary Remarks Warning symbols and safety symbols Target group in this instruction: The symbols used in the instruction must be observed and These instructions are intended for personnel trained in have the following meaning: electrical engineering and skilled operators of systems for natural smoke ventilation (NRA / RWA) (natural smoke Failure to comply with the warning notes exhaust system / smoke and heat exhaust system) and na-... -
Page 4: Safety Instructions
Preliminary Remarks Safety instructions It is important to follow these instruc- The types of cable, cable lengths and cross-sections must tions for the safety of persons. These be selected in accordance with the manufacturer’s technical arning instructions must be kept in a safe place data. -
Page 5: Guidelines And Standards
Preliminary Remarks Guidelines and Standards Ambient conditions It is essential that the most recent versions of country- specific laws, regulations, provisions and standards be ob- The product may not be subjected to impacts or falls, or served during installation and for electrical connections. to vibrations, moisture, aggressive vapours or other harmful environments, unless the manufacturer has released it for These are for instance:... -
Page 6: Data Sheet
Data Sheet 1.) Data sheet VRS Click Part.-No.: 660200 Application: The VRS Click is used for radio communication between Aumüller drives and VRS Remote. Operating voltage: 24V DC +/- 20%, (max. 2 Vss) Aumüller-Click Connector solution: Frequency band: 434 MHz, Frequency hopping... -
Page 7: General Notes
2.) General notes Connecting the VRS Click Operation VRS Remote „ Before connecting the VRS Click, make sure, that the • Short button press and normal button press: Aumüller drive is correctly installed and supplied Pressure duration shorter than 2 seconds with power. -
Page 8: Commissioning With Teach-In-Button
. This can have a lasting effect on the reception quality. Wire max. Ø1 mm Depth of immersion is 14 mm „ If the teach-in is successful, the LED at the VRS Click and at the VRS Remote ... -
Page 9: Link / Transfer Vrs Click And Vrs Rainsens 8
Commissioning With Teach-in Button Link / Transfer VRS Click and VRS RainSens Teach-in VRS RainSens at the VRS Remote „ For a long time press simultaneously VRS Remote „ For a long time press simultaneously VRS Remote seesaw-switch A (right) and seesaw-switch D (right) - seesaw-switch A (left) and seesaw-switch D (right) - (multiple seesaw-switch A). -
Page 10: Commissioning With Code-Id
VRS Remote is flashing green. The LED at the VRS Click starts to flash slowly. „ If the teach-in is successful, the LED at the VRS Click and at the VRS Remote turns off. Installation instruction... -
Page 11: Link / Transfer Vrs Click And Vrs Rainsens 10
Commissioning With CODE-ID Enter Teach-in VRS RainSens at the VRS Remote Link / Transfer VRS Click and VRS RainSens „ For a long time press simultaneously VRS Remote „ For a long time press simultaneously VRS Remote seesaw-switch A (left) and seesaw-switch D (right) - seesaw-switch A (right) and seesaw-switch D (right) - (multiple seesaw-switch A). -
Page 12: Deleting The Taught-In Participant
5.) Deleting the taught-in participant Teach-out a VRS Click on the VRS Remote Teach-out a VRS RainSens on the VRS Remote „ To delete a VRS Click from the VRS Remote „ To delete a VRS RainSens from the VRS Remote ... - Page 13 „ Switch off the supply voltage. „ Disconnect the connection cable from the defective drive. „ Dismantle the defective drive. „ Pull out the VRS Click from the Aumüller drive - using the pliers Do not pull at the antenna ...
- Page 14 Storage / Disposal / Warranties / Liability Demounting and dismantling Warranty and Customer service The Control Unit must be stored only in locations protected from mois- In principle, our: ture, severe contamination and temperature fluctuations (not above „General Terms for the Supply of Products and Services of the Electri- 30°C).
- Page 15 Certifi cate and Note: Declaration of Conformity The proof of the application of a quality management We declare under our sole responsibility that the product system is for company: described under "Data sheet" is in conformity with the GmbH UMÜLLER UMATIC following directives: according to the certifi cation basis DIN EN 9001 as well...
- Page 16 90000029221_V0.1_KW07/23...
Need help?
Do you have a question about the VRS Click and is the answer not in the manual?
Questions and answers