Table of Contents
Advertisement
The first time you connect the HD-AUD-IO to the PC, you may experience a short delay and
a windows notification pop-up message may display.
-
The software GUI scans the HD-AUD-IO settings continuously in real-time, all changes to the
system are reflected in the software GUI.
-
If no HD-AUD-IO device is attached to the system, the on-screen
fields are disabled (grayed out).
-
The new device detection and driver auto installation
typically only occurs once. Thereafter, devices that are
reconnected detect with no delay or message.
Only one instance of the software GUI can run at a time.
Executing the application more than once will result in a
warning message.
Tool Bar Menu
EXIT
Exits the application
TOOLS
Factory Defaults
Restore the device to factory default settings. The user must confirm the action.
Export EDID
Save the currently selected EDID as a 256-byte binary file.
Firmware Update
Allows users to field upgrade the device application firmware. Application firmware
that does not support this function will disable this option.
ABOUT
Displays screen with software versions, website
link, legal disclaimer and copyright information.
1.6. Status Bar
The bottom bar of the screen shows the current USB status as follows:
"Scanning for Hardware..."
The GUI software is looking for HD-AUD-IO devices.
The screen controls are disabled until a HD-AUD-IO device attaches.
Hall Technologies
October 6, 2023
Page 12 of 16
Advertisement
Table of Contents
