Advertisement
Quick Links
Advertisement
Summary of Contents for ARMOUR Denali
- Page 1 Safety Helmets USER MANUAL...
- Page 3 Certificates for unvented: EN 397, EN 50365 Thanks for choosing an armourU product. The Denali and Elbrus helmets have been designed for use in construction and industrial environments and are intended to provide protection to the wearer against falling objects and consequentially prevent head injuries.
- Page 4 Warning Please read the following instructions carefully before using the helmet. For adequate protection, the helmet must be fitted and/or adjusted to the user’s head. The helmet is made to absorb the energy of a blow by partial destruction or damage to the shell and the harness, and even though such damage may not be readily or visibly apparent, any helmet subjected to severe impact should be discarded and replaced.
- Page 5 Vented versions Manufacturer’s trademark Supplier’s trademark Year and quarter of manufacture Certification marking and notified body number 0497 Model name AHDEN02/AHELB02 European standard number for industrial safety helmets EN 397 Shell material Size range (head circumference) 52 – 63 cm Recyclable European standard number for Electrically Insulating Helmets for Use EN 50365...
- Page 6 Unvented versions Manufacturer’s trademark Supplier’s trademark Year and quarter of manufacture Certification marking and notified body number 0497 Model name AHDEN01/AHELB01 European standard number for industrial safety helmets EN 397 Shell material Size range (head circumference) 52 – 63 cm Recyclable Shock absorption properties preserved after exposure to low temperatures, -30°C...
- Page 7 Headband marking Material LDPE Size range (head circumference) 52 – 63 cm Eyewear markings Certification agency / notified body CSI S.p.A (0497), Viale Lombardia 20, 20021 Bollate (MI), Italy, Notified Body No.: 0497 Standards certified EN 166 (Personal eye protection), EN 14458 (Personal eye equipment – Face shields and visors for use with firefighters and industrial safety helmets used by firefighters, ambulance and emergency services Markings EN 166...
- Page 8 Eyewear Markings cont. Markings EN14458 Year of manufacture General use Eye guard 3-1.2 Scale number -20°C Extremes of temperature to which the eye guard has been tested Resistance to abrasion Resistance to fogging Ω Electrical properties See supplier’s / manufacturer’s information...
- Page 9 Using accessories The Denali helmet is equipped with safety spectacles that are intended to protect the wearer’s eyes from flying particles, dust, and splashed of liquid. When not needed, the spectacles are stored in stand-by position under the helmet’s shell. To move the spectacles into the in-use position, pull the tabs on the bottom part of the spectacles and adjust their position.
- Page 10 Storage To extend the lifetime of this product to the maximum: Clean the helmet after each use. Store it in a closed cabinet to prevent extended exposure to cold, heat, humidity, light, and fumes Warning Before wearing the helmet, you should perform a detailed inspection of the helmet and check if all its components are in their place and properly fixed.
- Page 12 (+44) 03300 552 553 info@armourU.com www.armourU.com...
Need help?
Do you have a question about the Denali and is the answer not in the manual?
Questions and answers