LG S90TY Owner's Manual page 69

The product • Did you turn off the wireless router and turn it on again?
does not
- Turn off the product and then turn it on again.
connect to the
• Have you installed a new wireless router?
Wi-Fi network
- You will need to reconfigure the network settings of the product. ([ See
• Did you change the settings of the wireless router?
- If the router password contains some special characters (such as ` ' " + /
- It is recommended to set the security type of the wireless router to WPA2.
• Unplug the router and plug it in after 10 seconds. Then try to connect after
network recovery.
• Changing the wireless channel on your router can help reduce wireless
interference. (Here is how to change the wireless channel of the most common
routers. For the exact details, refer to your router's instruction manual.)
A Enter the IP address on your smartphone, PC, or MAC, or use the setup wizard
B Find the wireless settings page and change the wireless channel of your
- If the router channel is 2.4 GHz, 6 ch / 11 ch
- If the router channel is 5 GHz, 48 ch / 149 ch
C Save the settings and restart the wireless router.
- Remove the power cable from the router, wait 5 seconds, and reconnect the
"Connecting with a Smartphone via Wi-Fi" on page 17.)
\ ; : - _ ^ & () <>) or emoticons, the soundbar may not be connected. It is
recommended to set a password using a combination of English letters and
numbers.
CD to log into the router setup page. This can only be done when the router is
connected to the network via Wi-Fi or an Ethernet cable.
2.4 GHz / 5 GHz network. If the "Auto" channel is enabled, disable it and set
up a specific channel.
power cable. When the router is completely powered on, try connecting it
again.
69