Fosmon HD8186 - HDMI Splitter with US AC Adapter Manual

Fosmon HD8186 - HDMI Splitter with US AC Adapter Manual

Advertisement

Fosmon HD8186 - HDMI Splitter with US AC Adapter Manual

Introduction

For optimum performance and safety, please read this user manual carefully before operating and keep it for future reference.
Fosmon's 1x2 HDMI splitter allows you to split 1 HDMI input into 2 different outputs.

Product Diagram

Product Diagram

Installation and Safety Precautions

  • Cables must be placed well, where it would not be stepped on or pinched. Make sure cables are fully inserted into ports.
  • To provide sufficient ventilation during use, make sure there is at least 1 inch of clearance on each side of the device (except the side where it rests on a flat surface).
  • Do not set up this product adjacent to a water source or an environment that has excessive moisture.
  • Do not operate the product when hands are wet.
  • Place this product on a flat surface and keep it out of reach of children.
  • Unplug the product when it is not in used for an extended period of time.
  • Do not attempt to dismantle the product on your own.

How to Connect

  1. Connect power adapter to outlet and the other end into HDMI splitter
  2. Connect input device HDMI cable into input port
  3. Connect output device HDMI cable to output port

Package Includes

  • 1x HDMI 1x2 Splitter
  • 1x Power Adapter
  • 1x User Manual

Specifications

Audio and Video Environmental
Input HDMI x 1 Operating Temperature Range 32°F to 104°F / 0°C to 40°C
Output HDMI x 2 Operating Humidity Range 5% to 90% RH (No Condensation)
Resolution 4K x 2K @30Hz Mechanical
HDMI Version 1.4a Micro USB Port Optional Power Support (cable not included)
HDCP Version HDCP 1.3
Color Depth Up to 48-bit deep color Dimension (L x W x H) 2.8 x 2.4 x 1in / 71 x 61 x 25mm
Input Video Signal 0.5-1.0 volts p-p Weight 4.51oz / 128g
Input DDC Signal 5 volts p-p ( TTL)

Audio Format DTS-HD, Dolby-trueHD, LPCM7.1, DTS, Dolby-AC3, DSD
Input Cable Recommendation ≤50ft/15m AWG24 HDMI standard cable

Troubleshooting

Issue Possible Solution

No Power

  1. If the connected HDMI device does not supply enough power to the splitter, please use the provided power adapter.

No Audio or Bad Quality Audio

  1. Check if the audio equipment is on.
  2. Check if the input source is on.
  3. Check if the input source audio output setting is set up correctly. Please refer to your input source user manual on how to change this setting.
  4. Check all cables and make sure they are fully seated into ports.
  5. Try changing to a different known good cable.

No Video or Bad Quality Video

  1. Check if the display is on.
  2. Check if the input source is on.
  3. Check all cables and make sure they are fully seated into ports.
  4. Try changing to a different known good cable.

Follow Us On Social Media

www.fosmon.com
support@fosmon.com
© 2018 Fosmon Technology All rights reserved.

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Fosmon HD8186 - HDMI Splitter with US AC Adapter Manual

Advertisement

Need help?

Need help?

Do you have a question about the HD8186 and is the answer not in the manual?

Questions and answers

Table of Contents