Onkyo A-8780 Service Manual page 19

Integrated stereo amplifier
Table of Contents

Advertisement

((2
Balance Control
Knob (BALANCE)
Adjust to control the relative volume level of the left and right
speakers or headphones.
MONITOR TAPE-1/TAPE-2
'The sound which is being recorded can be moni-
tored, when the three-head tape deck is connected.
When this is selected, DIRECT TONE, MUTING
(-20dB), BALANCE, and MODE can be effective.
(14 Recording Source Selector Switch (REC SELECTOR)
DAT or TAPE can be selected by the REC SELECTOR switch.
TAPE-1 ® DAT & TAPE-2
/ DAT
TAPE-1
& 2
: Use either of these settings for tape dubbing oper-
ations depending on which deck is being used for
playback and which is being used for recording. For
details, refer to the Operations section.
OFF
: When not recording or dubbing.
SOURCE: Recording from the source selected by the INPUT
SELECTOR
buttons or remote control transmitter.
(15)
Cartridge Selector Switch (CARTRIDGE)
MC SUBSONIC
: Turntable using an MC cartridge with
subsonic filter.
MC
: Turntable using an MC cartridge.
MM
: Turntable using an MM
cartridge.
MM SUBSONIC : Turntable using an MM
cartridge with
subsonic filter.
Use the MM position when a step-up transformer is being used
with a turntable equipped with an MC cartridge.
Remote
control transmitter
RC-180S
Power
Button (POWER)
TAPE-2
Oat
CD Operation
Buttons (CD)
These buttons. are used to operate an ONKYO
CD player with the FRI mark.
ut
=: Press this button to pause the CD
play back.
To resume disc play,
press the PLAY ( P ) button.
»
- Press this button to play the CD
player.
m
: Press this button to stop the CD
player.
eq
: Press this button to go back to the
beginning of the current track and
again to skip back to the previous
track.
PP)
- Press this button to skip to the next
track.
INPUT
GELECTOR
TAPE-1
C3 fC
ea
AUX-2
ONKYO
REMOTE
CONTROL
TRANSMITTER
fR 1
Tuner Operation
Buttons (TUNER)
<¢@ PRESET
P ;: Preset memory DOWN/UP
buttons
Tape Operation
Buttons
(DECK-A,
DECK-B)
These buttons control ONKYO double cassette
tape decks that can be remote controlled. Use
the DECK-B buttons to control single cassette
tape decks with the (RI mark.
4
: The tape plays, moving from right
to left, or, in the recording stand-by
mode, recording begins.
»
: The tape plays, moving from left to
right, or, in the recording stand-by
mode, recording begins.
e/a : When this is pressed, the recording
stand-by mode is entered.
@
: Interrupts all operations.
<<: Fast forward from right to left.
p>
- Fast forward from left to right.
TUNEA
*
co
AULIX-14
PHONO
<4
PRESET
P
VOLUME
Ff
Audio Muting
Button (MUTING
-—>°°)
This button temporarily switches off the sound
from the speaker or headphone.
Pressing this
button will operate the A-R700 audio muting
circuit.
The audio muting indicator will blink
on and off. Pressing the button again or using
the POWER button to turn the power on will
turn off the audio muting.
AC-1806
Volume Buttons (_ 4 UP, — DOWN)
2394 =
NAAF-3901
"951330018
"NCAF=3901
J}

Advertisement

Table of Contents
loading

Table of Contents