Setting The Time - P&C Wayfare Field Watch Manual

Setting the time

• To set the time pull out the crown to
the first click position 2.
• Turn the crown to set the hour and
minute hands.
• Push the crown back to the normal
position 1.
Setting the date and time
Setting the time • Pull the crown out to
position 2. • Turn the crown to set hour
and minute hands. • When the crown
is pushed back to the normal position,
second hand begins to run.
Setting the date
• Pull the crown out to position 1.
• Turn the crown counter-
clockwise to set the date.
* If the date is set between the
hours of around 9:00PM and 1:00 AM,
the date may not change the following day.
• After the date has been set,
1.2.
push the crown back to the normal position.
1. 2.
normal crown
position