12.MICOM Initialization & Update
12.MICOM Initialization & Update
. Micom Reset
During STANDBY mode , push the 'Remote controller's STOP' button 5 Second.
If red LED blinking, reset is finished.
. Micom Update (Only for Flash Micom)
Back of the Set there is a slide hole for update JIG.
To update Micom, it need Computer, Rom Writer, USB Cables
. Micom & MPEG Version Check
1) Play Disc or USB
2) Eject(Open) Disc , Push the Remote Controller "MENU" button.
3) Push the number '8', '9', '5' in order, and push 'Enter' button.
4) Check the display or OSD
. DVD flash initialize & Update method
1) Prepare HEX file at DISC or USB Memory
2) Insert Disc or USB Memory, and play. 'Updating' will be displayed. Set will be power off on
3) The disc is automatically ejected. (If you use USB memory, detach USB memory)
4) During "No Disc" Displayed, push the stop button 5 seconds. After displayed 'INITIALIZE' power off
5) Finished
54