Table of Contents
Advertisement
4. Troubleshooting
4-4-3 White Balance - Adjustment
(low light)
Sub Bright
5. W/B
R offset
G offset
B offset
4-5. Servicing Information
4-5-1 USB Download Method
Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-
SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will
be possible by connecting a USB drive to the USB port located on your TV.
1.
Insert a USB drive containing the firmware upgrade into the
MEDIA PLAY port on the side of the TV.
2.
Press the
MENU button to display the menu.
Press the ▲ or ▼ button to select Support, then press the
ENTER button.
3.
Press the ▲ or ▼ button to select
ENTER button.
The message Scanning for USB. It may take up to 30
seconds. is displayed.
4.
The message
Upgrade version XXXX to version XXXX?
The system will be reset affer upgrade. is displayed.
Press the ◀or ▶ to select the OK, then press the
ENTER button.
Please be careful to not disconnect the power or remove the
USB drive while upgrades are being applied. The TV will turn off
and turn on automatically after completing the firmware upgrade.
Please check the firmware version after the upgrades are
complete. When software is upgraded, video and audio settings
you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can
easily reset them after the upgrade.
4-24
(hight light)
Sub Contrast
R gain
G gain
B gain
(W/B adjustment Condition refer next page)
SW Upgrade, then press the
Advertisement
Table of Contents
