1. Manuals
  2. Brands
  3. Aquatec-Watermaker Manuals
  4. Water Dispenser
  5. Sand-Filter 350
  6. Technical manual

Aquatec-Watermaker Sand-Filter 350 Technical Manual

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

https://www.aquatec‐watermaker.de/en/downloads.html 
Manufacture and distribution by North-Marine Handels GmbH
Papenreye 61, D 22453 Hamburg.
Contact
Web
All contents of this manual, in particular texts, photographs and graphics are subject to German
copyright law. Copyright held by North Marine Handels GmbH. Duplication, editing, distribution and any
kind of use outside the limits of copyright law require the written approval of the author.
Technical Manual
Installation, operation and maintenance
Sand-Filter 350
Version 03 - 12.2023
Download latest manual at:
or the adjacent QR code
In case of doubt, the German original manual applies.
AQUATEC- Water maker,
sup@aquatec-watermaker.de, Tel: +49 (0)40-36850306
www.aquatec-watermaker.de

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sand-Filter 350 and is the answer not in the manual?

Questions and answers

Summary of Contents for Aquatec-Watermaker Sand-Filter 350

  • Page 1 Manufacture and distribution by North-Marine Handels GmbH Papenreye 61, D 22453 Hamburg. Contact sup@aquatec-watermaker.de, Tel: +49 (0)40-36850306 www.aquatec-watermaker.de All contents of this manual, in particular texts, photographs and graphics are subject to German copyright law. Copyright held by North Marine Handels GmbH. Duplication, editing, distribution and any...

  • Page 2: Explanation Of Symbols

    EXPLANATION OF SYMBOLS Warning! Warning! Attention! Immediate danger that Warnings regarding electric Indicates an can lead to serious injury power equipment. Non- instruction that to persons or damage to observance safety requires special the machine or the loss of instructions could lead to attention.

  • Page 3: Installation

    Installation 1. The filter should be installed on a equal, stable base. Position the filter so that the pipe connections and the control valve are practical and easily accessible for operation and maintenance purposes. Screw the filter to the base. 1.
  • Page 4 First commissioning of the sand filter Max. Feed- pressure 2.5 bar! To prevent damage to the control valve seal, always press the handle down before turning it. 1. Make sure that the correct amount of filter medium/ sand is in the tank and that all connections have been made and are tight.
  • Page 5 Valvepositions Switch off the feed pump before changing the valve position. Valveposition Function FILTER Normal filtering mode BACKWASH Cleaning the filter by reversing the flow direction RINSE Used after backwashing to flush dirt out of the valve WASTE Bypasses the filter, direct flow to the overboard side RECIRCULATE Bypasses the filter to feed water directly to the...
  • Page 6 Handling the filter 1. Open the seacock (10) and set the 3-way valve (13) to sea water. Valve (12) is open, valves (1) and (3) are closed 2. Start the feed pump (8) and check the pressure gauge (15) to see if there is feed pressure.

  • Page 7: Flow Diagram

    Flowdiagram   7 ...

  • Page 8: Part List

    Partlist Pos. Art. Nr. Description 88280105 1,5“ Valve 89280101 1.5" Connection with sight glass, O-ring 89280102 1.5" Connection (2 St.) with O-Ring 06011029 Pressure gauge 01271010 Flange clamp 02011134 O- Ring for tank neck 89010114 350 Filtertank 89010106 Filterpipe 01172008 Sidearms filterpipe 89010107 Water drain kit...

Table of Contents